Jura Capresso 13637 4Permanent settings in programming mode, ‘Maintenance status, ‘Clean’, 1/6’

4 Permanent settings in programming mode

4Permanent settings in programming mode

Press the P button to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multi- function buttons. The following settings can be made:

Programme item	Sub-item	Explanation
‘Maintenance status	‘Clean’,	T Start the required maintenance pro-
(1/6)’	‘Descale’ (only if filter is	gramme here.
	not activated),
	‘Change the filter’ (only
	if filter is activated),
	‘Rinse the coffee system’,
	‘Clean the milk system’
‘Product settings (2/6)’	‘Expert mode’,	T Select your settings for speciality coffees
	‘product selector’,	and hot water.
	‘One-off settings’,	T Deactivate the product selector view.
	‘Lock/enable’	T Specify whether or not to allow one-off
		settings during preparation.
		T Enable or disable individual products.
‘Maintenance settings	‘Filter’,	T Indicate whether you are operating your
(3/6)’	‘Water hardness’ (only if	IMPRESSA with or without a CLARIS Pro
	filter is not activated),	Blue filter cartridge.
	‘Switch-on rinse’,	T Adjust the water hardness.
	‘Rinse the milk system’	T Change the settings for the switch-on
		rinse and milk system rinse.
‘Machine settings	‘Save energy’,	T Select an energy-saving mode.
(4/6)’	‘Switch off after’,	T Set the time after which the IMPRESSA
	‘Units’,	should switch off automatically.
	‘Factory setting’	T Select the unit for the amount of water.
		T Reset the permanently set values of all
		products to the factory settings.
‘Machine settings (5/6)’	‘Choose language’,	T Select your language and the background
	‘Display’,	colour for the display.
	‘Colour scheme’

23