NUMBER BUTTONS - 10 KEY PAD
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 7:
_ 0 (Zero)
7(Seven)100+ BUTTON
Use the 100+ button to directly access channels above Channel 99. For example, to move to
channel 124:
100+
(_ 2 (TWO)
4(Four)RETURN+
The RETURN+button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels. To program:
RETURN+and hold for three seconds.
You can now scan through the channels using the CH+i- buttons.
RETURN+
You will return to your programmed channel
• To cancel your RETURN+channel, press and hold the RETURN+button for three seconds. The
message "RETURN CHANNEL CANCELLED!" will appear.
•RETURN+works only with CHANNEL+i-. Pressing any number key will cancel RETURN+.
VoCHIP
By pressing the remote control V-CH_Pbutton, the V-chip rating information for the program
which is being received isdisplayed on the screen.
if the V-chip rating information is not being sent, "UNRATED" is displayed on the screen.
if the zero ("0") button is pressed while the V-chip rating is displayed on the screen, all
categories with the same or a higher V-chip rating will be blocked.
For example, ifyou block movies rated NC-17, movies rated X will atso be blocked.
• V-chip blocks can be manually set one at a time by using the V-chip option inthe iNiTiAL
SETUP menu. For detailed information about V-chip ratings and V-chip manual settings, refer
to pages 33 to 38.
57