There | is | no | power, | - See | if the | power | cord | became unplugged. |
|
| ||
|
|
|
| - Check for | a | blown fuse or circuit breaker | or a power | outage. | ||||
There | is | no | picture | - | The | antenna | could be | disconnected. |
|
| ||
or sound |
|
| - | The | input | mode | (TV/Video) could be set | improperly. | See page 58. | |||
-The tuner (AUTO TUNER SETUP) could be set improperly. See page 29.
-The TV station may be having difficulties. Check to see if other stations are working.
Remote | control is not | - | Check | to see that the | batteries | are | still working | and | properly installed. | |||
operating | properly | - Make | sure | the | remote | has a clear | sight | path to | the | TV. | ||
or at all |
| - | Check | that | the | TV/CATV switch | is | in the | proper | position. | ||
-You may be too far from the TV. You must be within 23 feet (7 meters).
-Use the remote control while pointing it at the screen.
You cannot select a | - Make | sure the channels have been programmed. | See "Channel Summary" |
certain channel | page | 32. |
|
-Check to see if the channel is locked. See "Channel Summary - Lock 'page 32.
-Make sure the set did not become unplugged.
The power turns off
by itself- Perhaps the ON/OFF TIMER is set. See page 48.
- Check to see if the Sleep Timer was set. See page 55.
It does not | operate | This | television | is operated |
| by | a microprocessor. | It is possible | that | external | noise | ||||||
correctly |
| or interference | is | causing |
| the | problem. | If the | television | does | not function | correctly, | |||||
|
| remove | the | electric | plug | from | the wall | outlet | and | wait a | while | before | inserting it | ||||
|
| into | the | wall | outlet | again | and | operating | the television. |
|
|
|
| ||||
The clock | is wrong | The | power | was | interrupted | and the clock was not reset. | See | page | 30. |
| |||||||
The color quality is poor - Tint and Color may be improperly adjusted. See page 42.
-The VIDEO STATUS mode may be turned to the wrong setting. See page 56.
-If red, green and blue shadows appear on the contours of the image on the
|
|
| screen, |
| it is necessary | to | adjust the CRT | color | convergence. |
| See | page | 52. | |||||
There are | lines across | There | could | be interference | from | another | electrical | appliance, | such as | a | ||||||||
the | picture |
| computer, | another | TV | or VCR. Move | any | such | appliances | further | away | from | ||||||
|
|
| the TV. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The | picture | is spotted | There | could | be interference | a from | appliance, | like a | hairdryer or | |||||||||
|
|
| vacuum, | operating | Move | the | antenna | away | from | the | appliance | or | ||||||
|
|
| change to a coaxial cable connection which is less prone to interference. |
| ||||||||||||||
