JVC GVT0095-003A Using Sleep Timer, Press Sleep, Adjust the clock, How Sleep Timer actually works

English

•Each time you press these buttons, the timer mode and the source change as follows:

DAILY TUNER REC TUNER

DAILY TAPE DAILY CD

DAILY TUNER : tunes in to the last station you were listening to. (Daily Timer)

REC TUNER : records the last station you were listening to. (Recording Timer)

•Put a recordable cassette into the deck. DAILY CD : plays a CD. (Daily Timer)

•Load a CD.

DAILY TAPE : plays a tape. (Daily Timer)

• Make sure that the tape direction is correct.

5 Press UP or DOWN to set the volume level, then press CLOCK/TIMER.

•You can select the volume level (“VOLUME – –” and “VOLUME 0” to “VOLUME 40”).

If you select “VOLUME – –,” the volume is set to the last level when the unit has been turned off.

•To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level “VOLUME 0.”

The unit enters the clock setting mode.

DOWNUP

UP PREV NEXT

DOWN

CLOCK	CLOCK/TIMER
/TIMER

Using Sleep Timer

With Sleep Timer, you can fall asleep to music. You can set Sleep Timer when the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time length passes.

On the remote control ONLY:

1 Press SLEEP. SLEEP

The time length until the shut-off time appears and the SLEEP indicator lights up on the display.

•Each time you press the button, the time length changes as follows:

SLEEP 10 SLEEP 20 SLEEP 30

SLEEP 60

Canceled SLEEP120 SLEEP 90

2 Wait for about 5 seconds after specifying the time length.

To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shut-off time appears for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly until the SLEEP indicator goes off.

6 Adjust the clock.

• See “Setting the Clock” on page 9.

7 Press STANDBY/ON to turn off the unit (on standby) if you have set the timer with the unit turned on.

•When the timer turns on the unit, (timer) indicator and the selected timer

mode indicator (DAILY or REC) start flashing.

STANDBY/ON

STANDBY / ON

•Sleep Timer is also canceled when you turn off the unit.

•If you set the Sleep Timer after Daily Timer starts playing the selected source

Daily Timer is canceled.

•If you set the Sleep Timer after Recording Timer starts recording

Recording Timer is canceled, but recording continues until Sleep Timer shuts off the power.

To cancel the setting, press and hold CLOCK/TIMER until (timer) indicator goes off from the display.

•If the unit is turned on when the timer-on time comes Timer does not work.

•When you unplug the AC power cord or if a power failure occurs

The timer will be canceled. You need to set the clock first, then the timer again.

– 29 –