JVC UX-L46V Using the Timers, Using Daily Timer and Recording Timer, Press CLOCK/TIMER, English

Models: UX-L46V-- Consists of CA-UXL46V and UX-L36V GVT0095-003A UX-L46V SP-UXL36V CA-UXL36V CA-UXL46V

1 36
Download 36 pages 50.12 Kb
Page 31
Image 31
Using the Timers

Using the Timers

Continued

 

 

English

There are three timers available—Daily Timer, Recording Timer and Sleep Timer.

Before using the timers, you need to set the clock built in the unit (see page 9).

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

When the on-time comes, the unit automatically turns on (Using Daily Timer and Recording Timer (timer) indicator flashes just before the on-time, and continues flashing while the timer is operating). Then, when the off-time comes, the unit automatically turns off (on standby).

The timer setting remains in memory until you change it.

When the DAILY indicator is lit on the display, the timer acts as the Daily Timer. Once the Daily Timer has been set, it will be activated at the same time everyday until the timer is turned off.

When the REC indicator is lit on the display, the timer acts as the Recording Timer. After the Recording Timer has been performed, the details of the setting remain stored but the timer is turned off.

Before you start...

When using “ TUNER” as the source to play, make sure to select the desired station before turning off the power.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

2 Set the on-time when you want the unit to turn on.

1)Press UP or DOWN to set the hour, then press

CLOCK/TIMER.

2)Press UP or DOWN to set the minute, then press

CLOCK/TIMER.

The unit enters off-time setting mode.

DOWNUP

UP

PREV

NEXT

DOWN

CLOCK

CLOCK/TIMER

/TIMER

 

1 Press CLOCK/TIMER.– 28 –[DAILY Manual background]

3 Set the off-time when you want the unit to turn off (on standby).

1)Press UP or DOWN to set the hour, then press

CLOCK/TIMER.

2)Press UP or DOWN to set the minute, then press

CLOCK/TIMER.

The unit enters source selecting mode.

DOWNUP

UP

PREV

NEXT

DOWN

1 Press CLOCK/TIMER.

Manual background (timer) indicator lights up, and the timer mode indicator (DAILY or REC) and the current on-time flash on the display.

The unit enters on-time setting mode.

Manual backgroundManual background[DAILYManual background]

CLOCK /TIMER

CLOCK/TIMER

CLOCK

CLOCK/TIMER

/TIMER

 

4 Press UP or DOWN to select the timer mode (Daily Timer or Recording Timer) and the source to play, then press CLOCK/TIMER.

DOWNUP

UP

PREV

NEXT

DOWN

CLOCK

CLOCK/TIMER

/TIMER

 

– 28 –

Page 31
Image 31
JVC UX-L46V, CA-UXL46V, CA-UXL36V manual Using the Timers, Using Daily Timer and Recording Timer, Press CLOCK/TIMER, English