JVC GVT0095-003A manual Playing Back Discs CD/CD-R/CD-RW/MP3 Continued, Loading Disc, Load a disc

English

Playing Back Discs (CD/CD-R/CD-RW/MP3) Continued

When playing a CD-R or CD-RW To stop playing, press 7.

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back only if they are already “finalized.”

•You can play back your original CD-Rs or CD-RWs recorded in music CD format or in MP3 format (however, they may not be played back depending on their characteristics or recording conditions).

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

•CD-RWs may require a longer readout time. This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.

Loading Disc

/SELECT

1 Press SELECT CD 0 on the remote CD control (or 0 on the unit).

The unit automatically turns on and the disc tray comes out.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press SELECT CD 0 on the remote control (or 0 on the unit) again to close the tray.

		BASS
Total track number	Total playing time

To remove the disc, press 0 CD on the remote control (or 0 on the unit).

■For MP3 discs

1 Load a disc.

The unit searches for the disc (it may take some time), and the following information appears on the display (the group title will scrolls on the display).

MP3

Group title of the first group (scrolling)

MP3

Group number flashes Track number

2 Press ¢NEXT or PREV 4(or ¢NEXT/ PREV 4 on the remote control) to select a group you want, then press CD 3/8.

The group number, track number and track title will scroll on the display.

MP3

Track title of the first group (scrolling)

Playing Back the Entire CD—Normal Play

■For audio CDs

1 Load a disc.

2	CD
	Press CD 3/8.

The disc tray automatically closes and the first track of the CD starts playing.

SELECT

CD

Track number Elapsed playing time

•The CD automatically stops when the last track of the CD has finished playing.

MP3

Track number flashes

3 Press ¢NEXT or PREV 4(or ¢NEXT/ PREV 4 on the remote control) to select a track you want to start playback with, then press CD 3/8 again.

Only a maximum of 14 characters (including spaces between words) can scroll on the display. The exceeding characters will be ignored.

– 15 –