JVC CA-UXL46V manual 25, CD Direct Recording, One Track Recording, Load a CD, Press REC recording

Models: UX-L46V-- Consists of CA-UXL46V and UX-L36V GVT0095-003A UX-L46V SP-UXL36V CA-UXL36V CA-UXL46V

1 36
Download 36 pages 50.12 Kb
Page 28
Image 28
CD Direct Recording
REV.MODE
REV. MODE
On the unit
(only for UX-L36V)

English

CD Direct Recording

 

One Track Recording

 

 

 

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program Play.

This recording method is convenient when you record tracks while playing the CD. You can only record your favorite songs on the tape.

On the unit ONLY:

1 Put a recordable cassette in with the exposed part of the tape down.

2 Load a CD.

If the current playing source is not the CD player, press CD 3/8, then 7 before going to the next step.

If you do not want pauses of about 4 seconds recorded between selections, press CD 3/8 twice. Otherwise, non-recorded pause will be automatically recorded between selections.

If you want to record on both sides of a tape, see “To record on both sides—Reverse Mode.”

3 Press REC (recording).

REC

The REC (recording) indicator lights up on the display and recording starts.

After recording, the CD player and cassette deck automatically stop.

To stop while recording, press 7.

The tape stops after 4 seconds.

To remove the cassette, press 0 PUSH OPEN on the unit.

To record on both sides—Reverse Mode

Press REV.MODE (reverse mode) until

the One Track Recording indicator is lit.

When using the Reverse Mode for CD Direct Recording, start recording in

the forward (3) direction first. When the tape reaches its end while recording a song in the forward

direction (3), the last song will be re- recorded at the beginning of the reverse side (2).

If you start recording on the reverse

side (2), recording will stop when recording is done only on one side (reverse) of the tape.

When making Sleep Timer settings while doing CD Direct recording

Set enough time to allow for the CD to finish playing; otherwise the power will go off before recording is completed.

On the unit ONLY:

1 Put a recordable cassette in with the exposed part of the tape down.

2

Play the track on the CD you wish to record.

3

Press REC (recording).

REC

The CD player returns to the beginning of that track and the track is recorded on the tape.

After recording, the CD player and cassette deck automatically stop.

4 Repeat steps 2 and 3 to record other tracks you want.

To stop while recording, press 7.

The tape stops after 4 seconds.

To remove the cassette, press 0 PUSH OPEN on the unit.

– 25 –

Page 28
Image 28
JVC CA-UXL46V 25, CD Direct Recording, One Track Recording, Load a CD, Press REC recording, English, On the unit ONLY