JVC UX-L46V-- Consists of CA-UXL46V and Programming the Playing Order of the Tracks -Program Play

English

Programming the Playing Order of the Tracks —Program Play

You can arrange the order in which tracks play before you start playing. You can program up to 50 tracks.

On the remote control ONLY:

1 Load a disc.

•If the current playing source is not the CD player, press CD 3/8, then 7 before going to the next step.

2 Press PRGM (program). PRGM

The PRGM (program) indicator lights up on the display.

PRGM

• If a program has been stored in memory, the program is called up.

3 Press UP or DOWN to select the

track number, then press SET.	UP
• You can select the track number directly	DOWN
using the number buttons. (See “To go to
another track directly using the number
buttons.”)
	SET
PRGM

	Track number Program step number
4	Repeat step 3 to program other tracks you
	want.
5	Press CD 3/8.	CD

The tracks are played in the order you have programed.

To stop playing, press 7.

To exit from Program Play mode, press PRGM before or after playing. The PRGM (program) indicator goes off.

To erase the program, press 7 twice.

• Disc ejection also erases the program.

If you try to program the 51st track

“FULL” will appear on the display.

To check the program contents

You can check the program contents by PREV			NEXT
pressing ¢ NEXT or PREV 4
before or after playback.
• ¢ NEXT :
To check the contents in the	DOWN	UP
programmed order.
	PREV		NEXT
• PREV 4 :
To check the contents in the
reverse order.

To modify the program
On the remote control ONLY:
Before or after playing, you can erase the last	CANCEL
programed track by pressing CANCEL.

•Each time you press the button, the last programed track is erased from the program.

To add tracks in the program before playing, simply select

the track numbers you want to add by following step 3 of the programming procedure.

– 17 –