JVC DR-MV2SEU Digital Audio for Better Sound Quality (Only for DVD), After You Have Completed, Connections, 18 EN, Connecting to an MD deck or DAT deck

Started Getting

Recording from a camcorder or other Audio-Video equipment with no Scart output jack (AV3)

If no S-Video input jack is available, connect to VIDEO input jack on the front panel using an RCA Video cable.

Change the setup when using S-VIDEO input jack. (See page 33.)

AV3 (Front)

DUBBING

R	VCR/DVD	DVD
		S-VIDEO VIDEO (MONO) L-AUDIO-R
VCR		DVD

S-Video cable	Audio cable
(not supplied)	(not supplied)

S-VIDEO AUDIO

OUT OUT

Digital Audio for Better Sound Quality (Only for DVD)

Connecting a Dolby Digital™ decoder, DTS decoder or MPEG decoder

•Connecting multi-channel Dolby Digital decoder allows you to enjoy the 5.1ch Dolby Digital surround system as well as DTS decoder, 5.1 channel surround system.

•After connecting to a Dolby Digital decoder, set “Dolby Digital” to “Stream” in the audio menu. (See page 61.)

•After connecting to a DTS decoder, set “DTS” to “ON” in the audio menu. (See page 61.)

•After connecting to a MPEG decoder, set “MPEG” to “Stream” in the audio menu. (See page 61.)

Connecting to an MD deck or DAT deck

•The audio source recorded in Dolby Digital 5.1 channel surround format cannot be recorded using an MD or DAT deck as a digital sound.

•If not connected to a Dolby Digital decoder, set “Dolby Digital” to “PCM” in the audio menu. Playing back a DVD using incorrect settings may generate noise distortion, and damage speakers.

•Set “Dolby Digital,” and “MPEG” to “PCM” and set “DTS” to “OFF” in the audio menu for connecting to an MD or DAT deck.

•You can use AUDIO OUT jacks for the connection of your audio system.

After You Have Completed

Digital audio input jack

COAXIAL

Coaxial cable (not supplied)

Dolby Digital decoder, DTS decoder or MPEG decoder, etc.

DVD

DIGITAL	AUDIO	S-VIDEO
AUDIO OUT	OUT	OUT

COAXIALL

R

Connections

Switch the input selector on your TV to an appropriate external input channel. For details, refer to the Instruction Manual of your TV.

Note

•Connect this unit directly to the TV. If the Audio/ Video cables are connected to a VCR, pictures may be distorted due to the effects of the copy protection system.

DVD/VCR		DVD	ANTENNA
AV2(DECODER)	DIGITAL	AUDIO	S-VIDEO
	AUDIO OUT	OUT	OUT
			IN
	COAXIAL		L
AV1(TV)			OUT

R

The connections illustrated above are optional for better sound.

1 For clear digital sound quality, use the COAXIAL DIGITAL AUDIO OUT jack to connect your digital audio equipment.

If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

18 EN