5 Select “Stereo” or “Bilingual” using [Cursor U / D], then press [ENTER].

External input Audio

DVD

 

 

Stereo

Bilingual

6 Press [SET UP] to exit.

Hint

If you select “Stereo”:

The audio will be recorded as “stereo audio.”

If you select “Bilingual”:

The audio will be recorded as “bilingual audio” (see next section for more detail).

Setting Bilingual Recording Audio

Video

DVD-RW DVD-R

You can select either “Main” or “Sub” audio to record a bilingual broadcast in Video mode.

1 In stop mode, press [SET UP].

2 Select “Advanced Setting Menu” using [Cursor U / D], then press [ENTER].

If it has already appeared, proceed to step 3.

3 Select “Recording” using

[Cursor U / D], then press [ENTER].

4 Select “Bilingual Recording Audio” using [Cursor U / D], then press [ENTER].5 Select “Main” or “Sub” using [Cursor U / D], then press [ENTER].

 

 

 

 

 

 

 

Bilingual Recording Audio

DVD

 

 

 

 

 

 

 

 

Main

 

 

 

Sub

 

 

 

 

 

 

 

 

 

 

 

 

6 Press [SET UP] to exit.

Note

If you are recording onto a VR mode disc, both “Main” and “Sub” will be recorded regardless of your setting here. And when you play back, you can choose either audio format or a combination of both as your playback audio.

Basic Recording

VideoVR

DVD-RW DVD-RW DVD-R

Follow the steps below to record a TV programme.

1 Turn on the unit and insert a recordable disc.

Make sure that the TV input is set on the unit. This operation may take a few moments to complete.

2 Press [DVD].

3 Select the recording speed using [REC SPEED]. (See page 23.)

Make sure that the recording format is set to the desired mode. (See page 25.)

4 Select the desired channel to record using [PR +/-] or [the Number buttons].5 Press [DVD REC I] to start recording.

The ● mark will be displayed for 5 seconds.

To pause the recording, press [PAUSE p]. Press [DVD REC I], or press [PAUSE p] again to restart the recording.

6 Press [STOP S] to stop the recording.

This operation may take a few moments to complete.

Hint

You can change the channel while in the REC pause mode.

Note

Recording starts immediately and continues until the disc is full or you stop recording.

If the clock is not set, the date and time space next to title names in the Original or Playlist will be blank.

You cannot mix two formats on DVD-RW discs. If you insert a previously recorded disc, changing the recording format is not possible even if you change it in the Setting menu.

You cannot change the recording speed while in the REC or REC pause mode.

It is possible to record video only in the PAL system.

Recording

EN 27