To prevent accidental recording on a recorded cassette, remove its record tab. To record on it later, cover the hole with cellophane tape.
Record tab
One-Touch Timer Recording
VCR
This feature allows you to set the recording length simply by pressing [VCR REC I].
1 Turn on the unit and insert a recordable tape.
Make sure that the TV input is set on the unit.
2 Press [VCR].
3 Select the recording speed using [REC SPEED]. (See page 64.)4 Select the desired channel to record using [PR
5 Press [VCR REC I] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen.
0:30
(Normal Recording) 1:00
8:00 7:30
•When the unit reaches the specified time, it will be turned off automatically.
•To change the recording length during
•To cancel
Hint
•The remaining recording time will appear on the TV screen during
Note
•If VCR
•You cannot use the pause function during
•When
Search
Index Search
VCR
1 Press [VCR].2 Press [VCR SEARCH] so that the index search menu appears.3 Enter the number of recordings you wish to skip using [the Number buttons] within 30 seconds.
4 Press [FWD f] or [REV r] to start index search.If you want to go in the forward direction, press [FWD f].
If you want to go in the reverse direction, press
[REV r].
After index search, the VCR will play back the tape automatically.
Note
•This function is not available during recording.
•Every time a tape is recorded, an index mark is written on the tape.
Time Search
VCR
This feature allows you to go to a specific point on a tape by entering the exact amount of time you wish to skip in order to reach the point.
1 Press [VCR].
2 Press [VCR SEARCH] repeatedly so that the time search menu appears.3 Enter your desired time to skip using [the Number buttons] within 30 seconds.4 Press [FWD f] or [REV r] to start time search.If you want to go in the forward direction, press [FWD f].
If you want to go in the reverse direction, press [REV r].
After time search, the unit will play back the tape automatically.
Note
•This function is not available during recording.
•Press [STOP S] to stop the search.
•If the tape reaches the end during a Search, this unit will cancel the search and rewind the tape.
Functions VCR
EN 65