
VCR Functions
Playback
VCR
1 Press [STANDBY/ON /I] to turn on the unit.
To play back a tape, turn on the TV and be sure to select the input to which the unit is connected.
2 Press [VCR].
3 Insert a prerecorded tape, then press [PLAY P] to begin playback.
4 During playback, press [PAUSE p].
Playback will be paused and sound will be muted.
5 Press [PLAY P] to resume playback.
6 Press [STOP S] to stop playback.
7 Press [VCR STOP/EJECT S/O] on the unit to eject the tape.
Note
•When a tape without record tab is inserted, the unit will start playback automatically.
•Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press
[PR
Functions VCR
Recording and One-Touch Timer Recording (OTR)
Basic Recording
VCR
Before recording, make sure:
•The desired channel is selected by pressing the number buttons on the remote control.
•There is a tape with a record tab in the unit.
•The desired recording speed is selected in SP (standard play) or LP (long play) mode by pressing [REC SPEED] on the remote control.
Tape speed | Recording / Playback Time | ||
Type of tape | E60 | E120 | E180 |
SP mode | 1 hour | 2 hours | 3 hours |
LP mode | 2 hours | 4 hours | 6 hours |
• Refer to page 29 for instructions on timer recording.
1 Turn on the unit and insert a recordable tape.
Make sure that the TV input is set on the unit.
2 Press [VCR].
3 Select the recording speed using [REC SPEED].
•The desired recording speed is selected in SP (standard play) or LP (long play) mode by pressing [REC SPEED].
4 Select the desired channel to record using [PR
5 Press [VCR REC I] to start recording.
To temporarily stop recording or to resume it, press [PAUSE p]. After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.