If programming has been made at the end of the programming (PROG. 1) currently being recorded:

The timer programming set first (PROG. 2) has priority. PROG. 3 will not be recorded.

 

 

 

 

 

 

 

 

PROG. 2

PROG. 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

recording

PROG. 2

 

 

 

 

 

 

 

will start

 

 

 

 

 

 

 

PROG. 3

 

 

 

 

 

 

 

after

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG. 1

Actual

 

 

 

 

 

 

 

recording is

recording

PROG. 1

 

PROG. 2

completed.

 

 

 

 

 

 

 

 

 

Additional 30 seconds (at the most) are cut off.

If the recording time is partially overlapped:

The timer programming with the earlier start time (PROG. 2) has priority. PROG. 1 will start after PROG. 2 recording is complete.

PROG. 1

 

 

PROG. 2

 

 

Actual

PROG. 2

PROG. 1

recording

Additional 30 seconds (at the most) are cut off.

If the recording time entirely overlaps:

The shorter timer programming (PROG. 1) is not recorded.

PROG. 1

 

PROG. 2

 

Actual

PROG. 2

recording

 

Note for DVD recording

If the recording time of two programmes overlap, or the End time of a programme and the Start time of another is same, the first 30 seconds (at the most) of the subsequent programme are cut off.

If the End time of the programme currently being recorded and the Start time of the subsequent programme are same:

If PROG. 1 is a DVD recorded programme, the beginning of PROG. 2 may be cut off.

PROG. 1

 

 

PROG. 2

 

 

Actual

PROG. 1

PROG. 2

recording

The first 30 seconds

(at the most) are cut off.*

*If the cut off time exceeds 1 minute, the error number “E40” will appear in the timer programming list.

Settings for External Equipment

Connection to External Equipment

VideoVR

DVD-RW DVD-RW DVD-R VCR

Connect the external equipment using either the input jacks, AV1, AV2 (Rear) or AV3 (Front). However, for AV3 jacks, you have to select S-VIDEO input or VIDEO input jacks depending on the connected devices.

Use commercially available Scart, S-Video or Video cable and an Audio cable for this connection.

1

In stop mode, press [SET UP].

 

2

Select “Advanced Setting Menu”

 

 

 

using [Cursor U / D], then press

 

 

Recording

 

[ENTER].

 

 

 

 

 

 

 

 

 

 

3

If it has already appeared, proceed to step 3.

 

Select “Select Video” using

 

4

[Cursor U / D], then press [ENTER].

 

Press [ENTER].

 

 

 

 

 

5

Select the input jack type to be used

 

 

using [Cursor U / D], then press

 

 

[ENTER].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV3 (Front)

VCR

DVD

 

 

 

 

 

 

 

Video In

 

 

 

 

 

 

 

 

 

S-Video In

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you want to use VIDEO input jack (Composite), select “Video In.”

If you want to use S-VIDEO input jack, select “S-Video In.”

6 Press [SET UP] to exit.

EN 33