Manual Tuning 
Manually tune each channel.
1 In stop mode, press [SET UP].
“Easy Setting Menu” or “Advanced Setting Menu” will appear.
2 Select “Channel” using
[Cursor U / D], then press [ENTER].
Getting | 3 Select “Manual Tuning” using | |||||||||
| ||||||||||
| [Cursor U / D], then press [ENTER]. | |||||||||
Started |
|
|
|
|
|
|
|
|
|
|
|
| Manual Tuning |
| VCR | DVD |
|
| |||
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Position | P01 |
|
|
|
| |
|
|
|
| Channel | 12 |
|
|
|
|
|
|
|
|
| Decoder | OFF |
|
|
|
| |
|
|
|
| Skip | ON |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 Select “Position” using
[Cursor U / D], then press [ENTER].
5 Select the position number you wish to use using [the Number buttons] or [Cursor U / D], then press [RETURN].
You can select position numbers 01 to 99.
6 Select “Channel” using
[Cursor U / D], then press [ENTER].
7 Press [Cursor U / D] to start scanning.
•The tuner will begin to search up or down automatically. When a channel is found, the unit will stop searching and the picture will appear on the TV screen.
•You can select a desired channel number using [the Number buttons]. Refer to the following Channel Plan table and press the three digits to select the channel number.
(To select channel 4, press [0] first and then press [0] and [4]. Or press [4] and then “– – 4” appears and wait for 2 seconds.)
•If this is the channel you want, press [RETURN].
Channel Plan
Ch. Indication | TV Channel | |
02 | - 12 | E2 - E12 |
13 | - 20 | A - H (only ITALY) |
21 | - 69 | E21 - E69 |
74 | - 78 | X, Y, Z, Z+1, Z+2 |
80 - 99, 100 | S1 - S20, GAP | |
121 | - 141 | S21 - S41 |
This unit can receive the Hyper and Oscar frequency bands.
•If “Skip” is set to “ON,” select “Skip” using [Cursor U / D], then press [ENTER]. Select “OFF” using [Cursor U / D], then press [RETURN].
•If you want to decode scrambled signals, select “Decoder” using [Cursor U / D], then press [ENTER]. Select “ON” using [Cursor U / D], then press [RETURN].
•To store another channel, repeat steps 4 to 7.
8 After completion, press [SET UP] to exit.
To Select a Channel
Notes on using the Number buttons:
•Enter channel numbers as a
•You can select the external input mode “AV1,” “AV2” or “AV3.”
•To select “AV1,” press [0], [0], [1].
•To select “AV2,” press [0], [0], [2].
•To select “AV3,” press [0], [0], [3].
To Skip a Preset Channel
You can set the unit to skip channels you can no longer receive or seldom watch when you access channels using [PR
1 Follow steps 1 to 3 in “Manual Tuning.”
2 Select “Position” using
[Cursor U / D], then press [ENTER].
3 Select the position number you wish to skip using [the Number buttons] or [Cursor U / D], then press [RETURN].
4 Select “Skip” using [Cursor U / D], then press [ENTER].
5 Select “ON” using [Cursor U / D], then press [RETURN].
• To skip another channel, repeat steps 2 to 5.
6 Press [SET UP] to exit.