
Selecting the On-Screen Display (OSD) Language 
1 In stop mode, press [SET UP].2 If you select “Advanced Setting Menu,” proceed to step 3.If you select “Easy Setting Menu,” proceed to step 4.3 Select “Display” using[Cursor U / D], then press [ENTER].4 Select “OSD Language” using [Cursor U / D], then press [ENTER].5 Select the appropriate OSD language using [Cursor U / D], then press [ENTER].
|
|
|
|
|
|
|
|
|
|
| OSD Language | VCR | DVD |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Channel Setting
Tuning of this unit to broadcast channels can be performed in two ways.
Auto Tuning 
Programme the tuner to scan only the channels you can receive in your area.
1 Press [STANDBY/ON
“Easy Setting Menu” or “Advanced Setting Menu” will appear.
4 Select “Channel” using[Cursor U / D], then press [ENTER].
5 Select “Auto Tuning” using [Cursor U / D], then press [ENTER].The unit will start storing channels available in your area.
P 01
Auto Tuning Now
Started Getting
Wait for several minutes to finish channel storing.
6 Press [SET UP] to exit.
You can select only the channels memorized in this unit by using [PR
To select a channel
You can select a channel using [PR
To cancel auto tuning
Press [RETURN] or [SET UP] during scanning.
Note
•The selection will be affected by how you receive TV channels in your local area.
•If the auto tuning is cancelled during scanning, some channels not yet tuned may not be received.
•You cannot change the channel when either VCR or DVD is in any recording mode (normal recording,
EN 19