Signal Setting
Settings for input signals.
Item | To do |
|
| Setting value |
| |||
Component/RGB Select | Selects the signal type you want to use for COMPO./RGB terminals. |
| Component, RGB |
| ||||
Sampling Mode | Analog RGB input |
|
|
| ||||
|
|
|
| Standard: When the input signal is VGA60 or XGA60 |
|
|
| |
|
|
|
| Wide: When the input signal is WVGA60 or WXGA60 |
| Standard, Wide |
| |
|
|
|
| When the input signal is other than the above, the setting value does not affect the |
|
|
| |
|
|
|
| displayed image. |
|
|
| |
Wide XGA | Select the analog WIDE XGA signal format. | 1280*768, 1360*768 |
| |||||
SXGA/SXGA+ | Select the format when the analog SXGA60 signal comes in. |
|
|
| ||||
|
|
|
| SXGA: Select this when the SXGA60 signal comes in. |
|
|
| |
|
|
|
| SXGA+A: Select this when the SXGA+60/SXGA+60* signal comes in. |
| SXGA, SXGA+A |
| |
|
|
|
| When the input signal is other than the above, the setting value does not affect the |
|
|
| |
|
|
|
| displayed image. |
|
|
| |
I/P Mode*1 | Selects a proper mode corresponding to the input picture. |
| Normal, Cinema, Field |
| ||||
Color System | Select the color system. |
|
|
| ||||
|
|
|
| • If the picture is unstable with “AUTO,” select the color system according to the input signal. |
| Auto, NTSC, PAL, SECAM, |
| |
|
|
|
|
|
|
| NTSC 4.43, PAL M, PAL N, |
|
|
|
|
|
|
|
| PAL60 |
|
|
|
|
|
|
| |||
sub menu | Display the sub menu which enables you to adjust the items in “Signal Setting” while viewing the actual picture. |
| ||||||
reset | Restore the default settings for all the items in “Signal Setting”. |
|
|
| ||||
*1 | When “Low Latency” on the menu is set to “On”, forcefully perform I/P conversion using “Field” processing. |
|
|
| ||||
| Marker*1 |
|
|
|
|
| ||
|
|
|
|
|
| |||
| Settings for marker functions. |
|
|
|
| |||
|
|
|
|
|
|
| ||
Item | To do |
|
| Setting value |
| |||
1/2 |
| Area Marker | Activate/deactivate the area marker and select the style of it. |
| Off, Line, Half, Half+Line |
| ||
|
|
|
| The setting values and features are as follows. |
|
|
| |
|
|
|
| Off | : Deactivate the marker. |
|
|
|
|
|
|
| Line | : Displays the area with an outline. |
|
|
|
|
|
|
| Half | : The area outside the specified aspect ratio of the screen is displayed at 50% |
|
|
|
|
|
|
|
| transparency. |
|
|
|
|
|
|
| Half+Line : The area of the specified aspect ratio of the screen is indicated by an outline, |
|
|
| |
|
|
|
|
| and the area outside of that is displayed at 50% transparency. |
|
|
|
|
|
| Marker Aspect | Select the aspect ratio of the area marker. |
| 4:3, 14:9, 13:9, 2.35:1, 1.85:1, |
| |
|
|
|
|
|
|
| 1.66:1 |
|
|
|
| Safety Marker | Activate/deactivate the safety marker and select the style of it.*2 |
| Off, Line, Half, Half+Line |
| |
|
|
| Safety Area | Adjust the area of the safety marker. |
| 80% – 100% |
| |
|
|
| Frame*3 | Displays/Hides the video area. |
| Off, On |
| |
|
|
| Center Marker*3 | Displays/hides the marker indicating the center position of the picture. |
| Off, On |
| |
|
|
| Line Brightness | Adjust the brightness of the marker. |
| High, Low |
| |
2/2 |
| Activate/deactivate the area marker and select the style of it.*2 |
| Off, Line, Half, Half+Line |
| |||
|
|
| Select the aspect ratio of the area marker. |
| 4:3, 14:9, 13:9, 2.35:1, 1.85:1, |
| ||
|
|
|
|
|
|
| 1.66:1 |
|
|
|
| Activate/deactivate the safety marker and select the style of it.*2 |
| Off, Line, Half, Half+Line |
| ||
|
|
| Adjust the area of the safety marker. |
| 80% – 100% |
| ||
●The area marker or the safety marker is displayed by using AREA MARKER or SAFETY MARKER button, or external control.
●Select either
●When a picture is displayed in 4:3 aspect ratio, the safety marker for the 4:3 area is displayed.
●To display the safety marker for the area of a picture displayed in 16:9 aspect ratio, set Area Marker to "Off".
*1 | Memorized for each signal format. |
*2 | The setting values are the same as that of “Area Marker”. |
*3 | In 1:1 mode, this display is grayed out and cannot be operated. |
15