JVC DT-E17L4G, DT-E21L4 Audio Setting

Menu Configuration (cont.)

Audio Setting

Settings for the audio output balance, EMBEDDED AUDIO signals and audio level meter signal.

Item

To do

Setting value

Balance

Adjust the balance between the right and left speakers.

L5 – L1, 0, R1 – R5

Audio1 Assign

Select the video input through which audio is output.

SDI-1, SDI-2, HDMI-Digital,

Analog audio is input through the AUDIO ASSIGN (IN 1) terminal.

HDMI-Analog, Component/

RGB, Video

Audio2 Assign

Select the video input through which audio is output.

SDI-1, SDI-2, HDMI-Digital,

Analog audio is input through the AUDIO ASSIGN (IN 2) terminal.

HDMI-Analog, Component/

RGB, Video

Embedded Audio Group*1

Select the audio channel group of the EMBEDDED AUDIO signals.

1G, 2G, 3G, 4G, 1-2G, 1-3G,

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as

1-4G

follows. (G means GROUP)

: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)

: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)

1-2G

: channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/

1 – 8 (1G+2G)

: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)

1-3G

channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/

3+4/5+6/7+8/9+10/11+12/1–4(1G)/5–8(2G)/

9–12(3G)/1–8(1G+2G)/1–12(-3G)

channel(s) 13/14/15/16/13+14/15+16/13–16(4G)

1-4G

channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/1+2/3+4/

5+6/7+8/9+10/11+12/13+14/15+16/1–4(1G)/5–8(2G)/9–12(3G)/13-16(4G)/

1–8(1G+2G)/1–12(1-3G)/1-16(1-4G)

Level Meter Setting*1

Specify the audio level meter display for EMBEDDED AUDIO signal.

Example of audio level meter display - Connection between the level meter position and channel

Ex: When “Horizontal” is selected for “Level Meter Display”:

Ex: When “Vertical” is selected for “Level Meter Display”:

OVER LEVEL

REFERENCE

OVER LEVEL

LEVEL

-20dB -10dB

-10dB -20dB

-10dB

Red

-20dB

Yellow

Green

REFERENCE LEVEL

	• The number of audio channels displayed on the level meter varies depending on the setting value of “Embedded Audio
	Group”.
	• The level meter with no audio signal input is displayed in white for “3COLORS”, and in gray for “White”.
	• Display position
	When “Horizontal” is selected for “Level Meter Display”, the display position will be the top or bottom of the screen.
	When “Vertical” is selected for “Level Meter Display”, the display position will be the lower right, lower left, upper left, or
	upper right of the screen.
	• When “On” is selected for “Peak Hold”, the maximum value is retained a certain period when the signal level becomes
	maximum.
Level Meter Display	Select the status of the level meter (display vertically, horizontally, or not displayed).	Off, Vertical, Horizontal
Horizontal Channel	Select how the audio channels are displayed on the level meter.	Line, Divide
Arrange
Vertical Position	Adjust the vertical level meter position.	1, 2, 3, 4
Horizontal Position	Adjust the horizontal level meter position.	Upper, Lower
Meter Type	Specify the design of the level meter.	Bar, Block
Color	Select the color of the level meter display.	3Colors (colored depending
		on the level),
		White (white only)
Reference Level	Select the standard input level indicated on the level meter.	–20dB, –18dB
Over Level	Select the input level’s lower limit indicated in red for the “3Colors” display.	–10dB, –8dB, –6dB, –4dB,
		–2dB
Bar Brightness	Select the brightness of the level meter.	Low, High
Transparent	Adjust the transparency of the level meter display against the image.	Off, Background, All
Peak Hold	Activates/deactivates the peak hold function of the level meter.	Off, On

*1 Memorized for each input.