JVC Installing the monitor in the rack DT-V20L1D and DT-V20L1 only, To adjust the stand height

To adjust the stand height

You can select the stand height—higher position or lower position.

To change the stand height, change the position of the stand plate as illustrated below after detaching the stand from the monitor.

• For detaching the stand, see “To detach the stand” on page 4.

<Higher position>	<Lower position>
Screw holes for higher position	Screw holes for lower position

Stand plate

Stand plate

Stand body Stand body

7Installing the monitor in the rack (DT-V20L1D and DT-V20L1 only)

Use a JVC’s RACK MOUNT ADAPTER (RK-C20L1; not supplied).

CAUTION

•Detach the stand first.

•Ask your dealer to install.

To prevent an accidental fall

Fix the stand to a table or floor with M5 screws (not supplied).

• Choose the screws of proper length corresponding to the thickness of the table or floor.

<Top side view>

Screw holes

(See page 18 for the specifications of the screw holes.)

The illustration of the monitor is of DT-V24L1D.

Screw holes

(See page 18 for the specifications of the screw holes.)

5