A-B Repeat
•
3Display the
Dolby D | DISC 1 TITLE 2 | CHAP 3 TOTAL | 1:01:58 | ||
| 3/2.1ch |
|
|
|
|
TIME | OFF | CHAP. | 1/3 | 1/ 3 | 1/1 |
OFF
4 SelectDolby D | DISC 1 TITLE 2 | CHAP 3 TOTAL | 1:01:58 | |||
3/2.1ch | ||||||
|
|
|
|
| ||
TIME | OFF | CHAP. | 1/3 | 1/ 3 | 1/1 |
Time Search
You can move to a particular point by specifying the elapsed playing time from the beginning.
•Time Search cannot be used for MP3/WMA/JPEG/
1While playing (without PBC for SVCD/VCD), display the
•Except for DVD: Time Search can be used before starting playback.
2Select .
3Display the
Dolby D | DISC 1 TITLE 2 | CHAP 3 TOTAL | 1:01:58 | ||
| 3/2.1ch |
|
|
|
|
TIME | OFF | CHAP. | 1/3 | 1/ 3 | 1/1 |
| TIME | _ : _ _ : _ _ |
|
|
|
You can specify the time in hours/minutes/seconds.
English
ENTER | Dolby D | DISC 1 TITLE 2 | ||
3/2.1ch | ||||
| TIME | A- | CHAP. | 1/3 |
• After selecting the starting point (A), you can search for |
1 2 3
4 5 6
7 8 9
10 0 +10
Examples:
To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.
To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0.
the end point using ¡. |
| |
ENTER | portion plays repeatedly. |
To cancel
To remove the
ON
SCREEN
•It is always required to enter the hour digit (even “0” hour), but it is not required to enter trailing zeros (the last two digits in the examples above).
•To correct a misentry, press cursor 2 to erase the last entry.
5 Finish the setting.
| The System starts playing from the |
ENTER | specified time. |
To remove the
ON
SCREEN
25