
Menus
WIND CUT*IMAGE QUALITYREC MODESOUND MODESNAP/SLOWREC MEDIASettings: [ ] =
[OFF]: Disengages the function.
ON: Helps cut down on noise created by wind. The “” indicator appears. The quality of the sound will change. This is normal.


The Image Quality mode can be selected to best match your needs. For the approx. number of storable images, ( 23)
[SP]: To record in the SP (Standard Play) mode. (SP indicator does not appear on the screen.)
LP: Long
Note:
During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.
[12BIT]: Enables video recording of stereo sound on four separate channels. (Equivalent to the 32 kHz mode of previous models).
16BIT: Enables video recording of stereo sound on two separate channels. (Equivalent to the 48 kHz mode of previous models).
[SNAP ]: Snapshot mode.
SLOW : Live Slow mode.
For details on the procedure, refer to “Live Slow” ( 34) and Snapshot (Record Still Image On Tape)” ( 34).
When Snapshot recording is performed,
|
| (Tape): Still images are recorded only onto the tape. | |
|
| ||
|
| / | (Tape/Card): Still images are recorded not only onto |
|
| ||
|
|
| the tape but also in the memory card |
|
|
| (640 x 480 pixels). |
[ |
| ](Card): Still images are recorded into the Memory Card only. | |
|
|
| Select this setting to perform Dual Rec. ( 21) |
(RECORDING) is available for Video Recording Menu only.
* Available only when the MEMORY/VIDEO Switch is set to “VIDEO”.