Troubleshooting

EN 45

 

 

 

 

 

 

Warning IndicationMeaning / Remedy

 

 

 

 

 

 

 

 

 

 

 

• Displays the battery remaining power.

High

• As the battery power comes close to nil, the battery remaining power

indicator blinks. When the battery power is exhausted, power turns

 

 

 

 

 

 

 

 

 

 

off automatically.

Exhausted

 

 

 

 

 

 

 

 

SET TO MANUAL MODE

• Appears when you attempt to change “Menu Settings”, “Backlight

 

 

 

 

 

Compensation” or “Manual Focus” while in AUTO mode A. ( 20)

 

 

 

 

 

 

TAPE END

• Appears when the tape ends during recording or playback.

 

 

 

 

 

 

LENS CAP

• Appears for 5 seconds after power is turned on if the lens cap is

 

 

 

 

 

attached or when it is dark.

 

 

 

 

 

 

SET DATE/TIME!

• Appears when the date/time is not set. ( 17)

•The built-in clock battery has run out and the previously set date/time has been erased. Consult your nearest JVC dealer for replacement.

 

 

 

 

• Appears if a tape is loaded while the Power Switch is set to “REC”.

 

 

 

 

• Blinks when no tape is loaded.

 

 

 

 

 

 

CHECK TAPE’S ERASE

•

Appears when the erase protection tab is set to “SAVE” while the

PROTECTION TAB

 

Power Switch is set to “REC”.

 

 

 

 

 

 

 

 

 

 

•

Appears when the memory card’s memory is full and shooting is not

 

 

 

 

 

 

 

 

 

possible.

MEMORY IS FULL

 

 

 

 

 

 

 

 

 

 

UNIT IN SAFEGUARD

•

Error indications 01, 02 or 06.

 

MODE REMOVE AND

 

Remedy: Remove and reattach the power supply or battery.*

 

REATTACH BATTERY

 

 

 

OR DC PLUG

 

 

 

 

 

 

 

 

 

UNIT IN SAFEGUARD

•

Error indications 03 or 04.

 

MODE EJECT AND

 

Remedy: Eject the cassette and reinsert.*

 

REINSERT TAPE

 

 

*The camcorder turns off automatically. Re-check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

ENGLISH