JVC GV-PT1 manual Engagemode Source Edit Start, Print Stored Scenes, 1 2 3 5 6 7 9 10 11 13 14 15

31

4	MODE SELECT MENU
	TITLE
	SNAP SHOT PRINTING
	EDITING INDEX
	QUIT

TO SELECT PUSH ( SELECT ) TO SET

PUSH ( MODE SELECT )

1 2 3 4

5 6 7 8

910 11 12

13 14 15 16

If the stored image is shaky . . .

4 SELECT MODE

Place the pointer next to “EDITING INDEX” by pressing SELECT, then press MODE SELECT. •The Mode Select Menu disappears and the

Editing Index mode is activated.

•In this mode, one sheet is divided into 16 equal sections, regardless of the “MULTI PIX” setting in the Print Menu.

5 ENGAGEMODE SOURCE EDIT START

Edit indexing begins, and the Edit-In and Edit- Out points are automatically stored in the printer’s memory (1, 2, 3 and so on in ascending order).

•If you edited 8 scenes (a total of 16 “in” and “out” points), once they are all stored “MEMORY FULL” appears on screen.

•If you edited less than 8 scenes, the sections not filled with scenes will be white.

6 PRINT STORED SCENES

Insert a print sheet with its print side (the side with no writing on it) UP into the insertion slot until it is pulled in automatically.

•The Print Lamp lights, indicating printing is in progress.

•“NOW PRINTING” appears on screen, on a blue background.

•When the Print Lamp starts blinking, printing is complete. Remove the print from the exit slot. The Print Lamp goes out.

.... set “PIX STABILIZER” in the Print Menu to “ON”. This should stabilize the image.

If you want to switch between the image being input and the stored image . . .

.... press PICTURE SELECT. The input image and the stored image appear on the connected

TV alternately.

*During printing, the image being input alternates with “NOW PRINTING” (appears on a blue background).

*During printing, noise or color changing may be visible on the connected TV. This is normal and does not affect printing.

To exit the Editing Index mode . . .

.... after printing, place the pointer next to “QUIT” in the Mode Select Menu by pressing

SELECT, then press MODE SELECT. The screen disappears.

To print multiple copies of the same scene . . .

.... after the first print sheet comes out the exit slot, put another in the insertion slot and print

as before.

* Do not attempt to insert a print sheet during printing, as this can result in malfunctions.