B of the

10

PREPARATION

Door

Install/Remove Ink Sheet Cartridge

Before printing, you need to install an ink sheet cartridge. Follow these instructions for initial installation and for removal and replacement of a used cartridge.

NOTE:

Make sure the unit power is off before opening the lid.

A

A

1 OPEN PRINTER LID

Slide the knob in the direction of the arrow. •The lid springs up, so apply gentle pressure

as you open it.

2 REMOVE PROTECTIVE CLIP

Press A as indicated by the arrow, then lift and remove the clip.

•Store the clip in a safe place, and re-attach it prior to transporting the unit.

3 TAKE UP SLACK

Using your index finger, turn the roller on the side with the “ ” mark in the direction of the arrow.

4 INSTALL CARTRIDGE

Hold B , turn the cartridge until it’s at the proper angle, then slide it in until you hear it click.

B

OR . . .

REMOVE CARTRIDGE

Open the printer lid, grab the cartridge, and slide it out slowly.

5 CLOSE PRINTER LID

Press down on the lid (where PUSH appears) until you hear it click into place.

CAUTION:

The thermal heads on the underside of the lid may become hot. Take care not to touch them when installing or removing the cartridge.

NOTE:

When you’re moving, or prior to transporting the video printer, be sure to remove the ink sheet cartridge and re-attach the protective clip.

Page 10
Image 10
JVC GV-PT1 manual Install/Remove Ink Sheet Cartridge