15
4 BEGIN SOURCE PLAYBACK
5 STORE DESIRED SCENE
Press MEMORY when the desired scene appears. The scene is stored in memory and appears on the screen.
6 PRINT SCENE
Insert a print sheet with the print side (the side with no writing on it) UP into the print sheet insertion slot until it is pulled in automatically. •The Print Lamp comes on, indicating printing
is in progress.
•“NOW PRINTING” appears on screen, on a blue background.
•When the Print Lamp starts blinking, printing is complete. Remove the print from the exit slot. The Print Lamp goes out.
If the stored image is shaky . . .
.... set “PIX STABILIZER” at the Print Menu to “ON”.
If you want to switch between the image being input and the stored image . . .
.... press PICTURE SELECT. The input image and the stored image appear on the connected
TV alternately.
*During printing, the image being input alternates with “NOW PRINTING” (appears on a blue background).
*During printing, noise or color changing may be visible on the connected TV. This is normal and does not affect printing.
If you store the wrong scene . . .
.... press PICTURE SELECT so the input image appears, then find the correct scene and store
it in memory.
If you want to print multiple copies of the same scene . . .
.... after printing, take the print sheet out of the exit slot. Insert a new print sheet in the
insertion slot.
* Do not attempt to insert a print sheet during printing, as this can result in malfunctions.
To print a “live” image using a camcorder as the source . . .
.... in step 4, instead of playing back the source tape, engage the camcorder’s Record mode.
If you’re using a JVC camcorder, you can store a scene you want to print by pressing the camcorder’s Start/Stop button (in place of the
