16 EN
GETTING STARTED
Charging the Battery Pack
Attach the battery pack.(Z p. 4)
• You can also connect the AC adapter using
the Everio dock connector. (Z p. 9)
• The power/charge lamp blinks to indicate
charging has started.
• When the lamp goes out, charging is
finished.
• Unplug the AC adapter from the AC outlet
and disconnect the AC adapter from the
camera.
To check the remaining battery power
See page 20.
To detach the battery pack
Open the LCD monitor and turn off the
camera using the DISPLAY/< button before
detaching the battery pack.
NOTE
• You can also use the camera with just the AC
adapter. (Z p. 4)
• Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Date/Time Setting
1 Open the LCD monitor to turn on the
camera.
2 Touch MENU.
3 Select [DISPLAY SETTINGS].
4 Select [CLOCK ADJUST].
5 Select [CLOCK SETTING].
6 Select the city closest to the area
where you use the camera.
Selected area is highlighted
Principal city of the
selected area
Time difference to
GMT
7 Select [ON] if daylight saving time is
observed.
8 Set the date and time.
Change the setting by using the touch
sensor and select [&] to set.
9 Select [SAVE].
To reset the setting, select [CANCEL].
Necessary Settings before Use