![](/images/backgrounds/169492/bg41.png)
Masterpage:Right-NoTitle0
EN 65
Filename [HM-HDS4EX_05Timer.fm]
Page 65 April 2, 2003 3:53 pm
Normal Dubbing
(from HDD to VHS)
You can dub selected scenes from the HDD deck to a cassette,
starting and stopping wherever you wish.
ALoad a cassette.
Insert a cassette with the record safety tab intact.
BPrepare the HDD deck for dubbing.
ASlide TV/CABLE/SAT to the right, then press HDD and
select the programme to be dubbed. You can select the
programme by HDD Navigation. (墌pg. 24)
BPress VCR PR+/– to set the channel other than “DUB”.
CLocate the start point.
ASearch for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
BPress 3 a little, then press 4 to start playback.
CPress 9 to pause playback a little before the start
point.
DPrepare the VHS deck for dubbing.
APress S-VHS.
BPress VCR PR+/– to set the channel “DUB”.
CPress MODE to select tape speed.
DSearch for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
EStart dubbing.
APress HDD and 4 to start playback.
BPress S-VHS and 7 (7 and 4 on the remote control)
to start dubbing.
FEnd dubbing.
Press 8. Then press HDD and press 8.
NOTES:
●There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
●The superimposed indication during the operation or dubbing
is not recorded.
?
HM-HDS4EX.book Page 65 Wednesday, April 2, 2003 3:55 PM