JVC 0503-AH-ID-JVE, ENLPT0736-001B, HM-HDS4E Edit To Or From Another Video Recorder

Filename [HM-HDS4EX_06Edit.fm]
Masterpage:Left
70 EN
Page 70 April 2, 2003 3:20 pm
EDITING (cont.)
Edit To Or From
Another Video
Recorder
You can use your recorder as the source player or as the
recording deck.
AMake connections.
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on
page 71.
AWhen using your recorder as the source player ...
... connect its L-1 IN/OUT connector to the recording
deck.
BWhen using your recorder as the recording deck ...
... connect its L-1 IN/OUT or L-2 IN/DECODER
connector to the source player.
CIf another recorder is compatible with the Y/C signal ...
... connect your recorder’s L-1 IN/OUT connector to
another recorder.
With C connection ...
●When using your recorder as the recording deck, set “L-1
INPUT” to “S-VIDEO” and “L-2 SELECT” to “A/V” (墌pg. 68,
69).
●When using your recorder as the source player, set “L-1
OUTPUT” to “S-VIDEO” (墌pg. 68).
BSelect the recording deck.
Slide TV/CABLE/SAT to the right, then press HDD or S-
VHS.
CSet the input mode of recording deck.
With this video recorder, press AUX (number key “0”)
and/or VCR PR to select “L-1” for the L-1 IN/OUT
connector, or “L-2” for the L-2 IN/DECODER connector,
depending on the connector being used.
●When using another recorder as the recording deck, refer to its
instruction manual.
●When using the L-2 IN/DECODER connector, set “L-2
SELECT” to “A/V” (墌pg. 69).
DSet the edit mode.
See “PICTURE CONTROL” on page 83.
EStart the source player.
Engage the Play mode of the source player.
FStart the recording deck.
Engage the Record mode of the recording deck.
Advantages of S-VHS video recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
●From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
●From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
●From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
?
HM-HDS4EX.book Page 70 Wednesday, April 2, 2003 3:55 PM