JVC 0503-AH-ID-JVE, ENLPT0736-001B, HM-HDS4E A, B, C, D, A, B, C, D, E, F

Masterpage:Right-NoTitle0
EN 93
Filename [HM-HDS4EX_07Sub.fm]
Page 93 April 2, 2003 3:11 pm
Fine-Tuning Channels Already Stored
ASelect the channel to fine-tune.
Press w r e t until the channel you want to tune begins
blinking.
BAccess the Manual Channel Set screen.
Press OK twice. The Manual Channel Set screen appears.
CPerform tuning.
Press e until “+/–” begins blinking, then press rt until
the picture is its clearest. Then press OK.
●The Confirmation screen appears.
●Repeat steps A – C as necessary.
DClose the Confirmation screen.
Press MENU.
When Receiving A Scrambled
Broadcast
ASelect the decoder mode.
Set “L-2 SELECT” to “DECODER” (墌pg. 69).
BAccess the Confirmation screen.
Perform steps A and C of “Manual Channel Set” on
page 90.
CSelect the position.
Press w r e t to select the channel position
broadcasting scrambled programmes, then press OK
twice.
DChange the decoder setting.
Press e until “OFF” (decoder setting) begins blinking,
and set it to “ON” by pressing rt.
EReturn to the Confirmation screen.
Press OK.
●Repeat steps C – E as necessary.
FClose the Confirmation screen.
Press MENU.
Perform steps A and C of “Manual Channel Set” on page 90
to access the Confirmation screen before continuing.
INFORMATION
If you live in Eastern Europe, “TV SYSTEM” setting appears
instead of “DECODER” setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
select appropriate TV system (D/K or B/G). Normally, TV
programmes are broadcasted as follows.
For Eastern Europe : D/K
For Western Europe : B/G
ASelect a country in Eastern Europe in step E on page 88.
BPress e until the TV system (D/K or B/G) blinking on the
Manual Channel Set screen in step E on page 90.
CPress rt to select appropriate TV System (D/K or B/G).
HM-HDS4EX.book Page 93 Wednesday, April 2, 2003 3:55 PM