Filename [HM-HDS4EX_05Timer.fm]
Masterpage:Left
48 EN
Page 48 April 2, 2003 3:53 pm
TIMER RECORDING (cont.)
Express Timer
Programming
You can programme this recorder to timer-record as many as 16
programmes.
If you do not know the SHOWVIEW number for the programme
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
ATurn on the recorder.
Press 1.
BLoad a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
CAccess the programme screen.
APress PROG.
BPress w e to move the arrow to “PROGRAMME”, then
press OK.
●When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel
some of the currently set programmes. (墌pg. 50)
DSelect the programme date.
Press w r e t to move the arrow to the desired date,
then press OK.
ESelect the recording deck.
APressr t to move the arrow to “RECORD TO”, then
press OK.
BPress r t to select “HDD” or “VHS”, then press OK.
FSet the start time and stop time of the
programme.
APress t to move the arrow to “START” or “STOP”,
then press OK.
BPress r t to select the desired time, then press OK.
GSelect the channel position.
APress t to move the arrow to “TV PROG”, then press
OK.
BPress r t to select the desired channel, then press
OK.
●If you want to set a satellite programme, press the number key
“0” to change “TV PROG” to “SAT”, then press VCR PR+/–.
CPress t to move the cursor to “CONFIRM”, then press
OK.
HSet the recording speed.
APress r t to move the arrow to “REC MODE”, then
press OK.
DPress r t to select the desire mode, then press OK.
Before performing Express Timer Programming:
●Make sure that the recorder’s built-in clock is set properly.
●Turn on the TV and select the AV mode.
●Slide TV/CABLE/SAT switch to the right.
?
HM-HDS4EX.book Page 48 Wednesday, April 2, 2003 3:55 PM