JVC HR-S4800U 12 EN, Setting clock manually

12 EN INITIAL SETTINGS (cont.)

POWER

S-VIDEO VIDEO (MONO)L—AUDIO—R

	4 – 7
	8
			REW	FF
			MENU
			PLAY
S-VHS ET	SP EP	CH
	VCR		REC STOP/EJECT PAUSE
			OK
	4 – 7

5 Set date

On the front panel:

Press CH5° until the desired date appears, then press OK.

On the Remote:

Press SHUTTLE PLUS %Þ until the desired date appears, then press OK or SHUTTLE PLUS #.

c Holding CH 5° or SHUTTLE PLUS %Þ changes the date in 15-day intervals.

6	Set year
	On the front panel:
	Press CH5° until the desired year appears, then
	press OK twice.
	On the Remote:
	Press SHUTTLE PLUS %Þ until the desired year
	appears, then press OK or SHUTTLE PLUS # twice.

1

8 4 – 7

4 – 7

Setting clock manually

— Manual Clock Set

First follow steps 1 to 3 on page 10, then go to the following steps.

4	Set time
	On the front panel:	CLOCK SET
	Press CH5° until the
		TIME	DATE YEAR
	desired time appears,
		– –:– –AM	1/ 1	00
	then press OK.	AUTO CLOCK : ON		(CATV)
	On the Remote:	HOST CH	: AUTO
		D.S.T.	: AUTO
	Press SHUTTLE PLUS	TIME ZONE	: AUTO
		PRESS (5,°), THEN (OK)

%Þuntil the desired time PRESS (MENU) TO END

appears, then press OK or SHUTTLE PLUS #.

c Holding CH 5° or SHUTTLE PLUS %Þ changes the time in 30-minute intervals.

c When the time is entered manually, “AUTO CLOCK” is automatically set to “OFF”, and “HOST CH” and “TIME ZONE” disappear.

7	Select D.S.T. mode
	You can select either “ON” or “OFF”.
	ON–	Adjustment will be made by the built-in
		clock itself.
	OFF–	Select when Daylight Saving Time does
		not apply to you.
	On the front panel:
	Press CH5° to select the desired setting.
	On the Remote:
	Press SHUTTLE PLUS %Þ to select the desired
	setting.

8	Start clock
	Press MENU and normal screen appears.

To make corrections any time during the process

Press OK or SHUTTLE PLUS # repeatedly until the item you want to change blinks, then press CH 5° or

SHUTTLE PLUS %Þ.

HR-S4800U/S3800U-EN01-20 12 00.1.31, 9:55 AM