JVC HR-S4800U manual VHS Mode, Av Compu-Link

	EN 41
	* The default setting is bold in the table below.
m AUDIO MONITOR	This VCR can record two sound tracks simultaneously (normal and Hi-
HI-FI: Normally select this.	Fi) on a Hi-Fi stereo tape.
	You can select the sound track(s) to listen to while playing back a Hi-Fi
Hi-Fi sound is played
	stereo tape.
back.
	In addition, when playing back a prerecorded tape containing two
HI-FI L: Sound on the left Hi-Fi
	separate audio programs on the Hi-Fi tracks, you can choose either one
channel is played back.
	by selecting either “HI-FI L” or “HI-FI R”.
HI-FI R: Sound on the right Hi-Fi
channel is played back.	NOTES:
NORM: Sound on the normal track
is played back.	c While playing back a monaural tape, sounds on the normal track will be heard
MIX:	regardless of this setting.
Both sounds on the Hi-Fi	c If RF connection (Z pg. 7) is used for viewing pictures on the TV, sound will be
	monaural even though you select “HI-FI”.
track and normal track are
	c You can also use the A. MONITOR button on the Remote to select the desired
mixed and played back.
	monitor sound. (Z pg. 23)
m S-VHS MODE	You can determine which recording mode — either S-VHS mode or VHS
ON	mode — is used for recording on S-VHS tapes.
OFF	When this function is set to ÒONÓ, you can record on S-VHS tapes with
	S-VHS picture quality.
	When this function is set to ÒOFFÓ, you can record on S-VHS tapes with
	VHS picture quality.
	NOTES:
	• S-VHS mode allows you to make high quality video recordings with horizontal
	resolution of 400 lines, comparing with the 230 lines of resolution of
	conventional VHS recordings. To achieve the highest quality picture we
	recommended to record in S-VHS mode. (But remember that a conventional
	VHS VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS
	mode.)
	• S-VHS MODE setting does not affect recording on VHS tapes. Recording on
	VHS tapes is always performed in VHS mode except when using S-VHS ET
	mode (Z pg. 27).
m AV COMPU-LINK	The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used
ON	as either the REMOTE PAUSE terminal or the AV COMPULINK terminal.
OFF	When this function is set to ÒONÓ, you can use the this terminal as the
	AV COMPULINK terminal.
	By connecting other JVC’s AV COMPULINK components (see the
	diagram below), including amplifiers (or receivers) and televisions, one
	touch control of the audio and video components linked via their AV
	COMPULINK connectors becomes possible.
	For example: simply load a cassette in the VCR and press PLAY ( 3) and the
	AV COMPULINK components automatically turn on, the TV’s AV mode is
	selected and the VCR starts playback. (You do not have to press PLAY ( 3 ) if
	the cassette’s record safety tab is removed.)
	When this function is set to ÒOFFÓ, you can use this terminal as the
	REMOTE PAUSE terminal. (Z pg. 45)
	NOTE:
	Connection varies depending on the type of JVC TV you have. Refer to the TV’s
	instruction manual when making this connection.
	CONTINUED ON NEXT PAGE \

HR-S4800U/S3800U-EN38-43 41 00.1.31, 10:01 AM