JVC HR-S4800U manual Express Timer Programing, 34 EN, Set program stop time, Set program date

34 EN TIMER RECORDING (cont.)

Express Timer Programing

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

You can directly program the VCR’s timer to record up to 8 broadcasts, as far as a year in advance. Remember, the clock must be set before you can program the timer (Z pg. 8 or 10).

1	Load a cassette
	Make sure the record safety tab is intact. If not,
	cover the hole with adhesive tape, then load it
	into the VCR.
	c The VCR turns on, and the counter is reset,
	automatically.

1

4

DAILY

7

POWER

2 3

2

5	6
8	9	WEEKLY

0 4 0

2	Access VCR PLUS+ screen
	Press PROG..
3
	Access Program screen
	Press START +/Ð once.	PROGRAM 1
	(If no program is stored,	START		STOP
	“PROGRAM 1”
		– –:– –AM	=	– –:– –AM
	appears.)	DATE		CH
		– –/– –/– –		– – –	SP

PRESS (+/–, SP/EP, 8=DAILY,

9=WEEKLY), THEN (0K) PRESS (PROG.) TO END

3	4
	5
2	9	1

7

6 8

4	Set program start time
	Press START +/Ð

repeatedly to enter the time you want recording to start.

PROGRAM 1

START		STOP
8:00 AM	=	– –:– –AM
DATE		CH
– –/– –/– –		– – –	SP

9

c Press and hold START +/Ð to increase the time in 30-minute intervals.

PRESS (+/–, SP/EP, 8=DAILY,

9=WEEKLY), THEN (0K) PRESS (PROG.) TO END

5	Set program stop time
	Press STOP +/Ð repeatedly to enter the time you
	want recording to stop.
	c Press and hold STOP +/Ð to increase the time in
	30-minute intervals.

6	Set program date
	Press DATE +/Ð. (The current date is displayed on
	the screen. The date you enter appears in its
	place.)

7	Set channel number
	Press CH +/Ð.

c If you are using a DBS receiver, see “ATTENTION FOR DBS RECEIVER USERS” on next page.

c Holding down CH +/Ð rapidly changes the channel numbers.

HR-S4800U/S3800U-EN30-37 34 00.1.31, 10:26 AM