JVC HR-S4800U manual 24 EN, Locating beginning of timer, Start search, Access distant code

24 EN BASIC PLAYBACK AND RECORDING (cont.)

H

				REW	FF
POWER				MENU
					PLAY
S-VIDEO VIDEO (MONO)L—AUDIO—R
S-VHS ET	SP	EP	CH
		VCR		REC	STOP/EJECT PAUSE

OK

H

1 2 3

2

4 5 6

7 8 9

0 4

1

REW ( 1 FF ( ` )

G

Other Useful functions for playback

You can also use the following functions for recording.

cVideo Calibration (Z pg. 39)

When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest- possible pictures.

cPicture Control (Z pg. 39)

This function helps you to adjust the playback picture quality according to your preference.

cVideo Stabilizer (Z pg. 40)

You can automatically correct vertical vibrations in the picture when playing back unstable recordings made on another VCR.

cBlue Back (Z pg. 40)

When this function is set to “ON”, the TV screen becomes all blue in the following cases:

–When receiving a channel not in use.

–When stopping playback.

G Locating beginning of

recordings — Index Search

Index codes are placed on the tape at the beginning of each recording when recording on this VCR. You can find and automatically play back from the beginning of any recording using the Index Search function.

1 Start search

While the tape is not running, press SHUTTLE PLUS

4or ¢ on the Remote.

2 Access distant code

To access a recording of 2 to 9 index codes away, press SHUTTLE PLUS 4 or ¢ repeatedly until the correct number is displayed on screen (only if “SUPERIMPOSE” is set to “ON” ; Z pg. 38, 39).

Playback begins automatically when the desired recording is located.

Beginning of the current			Current position			Beginning of the 2nd next
program recorded			on the tape			program recorded
Previous				Next
program				program	2nd	next
recorded				recorded
–2
	–1	1			2	3

4 ¢

c If you want to find the very beginning of the desired program, press REW ( 1 ) or FF ( ` ) after playback starts.

NOTE:

An index code is not placed on the tape when recording is resumed from recording pause.

H Locating beginning of timer

recordings — Instant Review

At the press of a button, you can turn on the VCR, rewind the tape and begin to view the most recent timer- recorded program.

Press REVIEW after ensuring that the VCR is in the timerrecordingstandbymode.

c The VCR turns on, and rewinds to the index code indicating the beginning of the last timer-recorded program, then begins playback automatically.

c You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have 5 programs recorded and you want to watch the third one, press REVIEW three times.

cIf you want to find the very beginning of the desired program, press REW ( 1) or FF ( `) after playback starts.

c If the tape is already rewound when REVIEW is pressed, it will play the tape from the beginning. It will not fast-forward to an index code.

c The Instant Review function will also operate if the VCR is turned on.

HR-S4800U/S3800U-EN21-29 24 00.1.31, 9:57 AM