JVC HR-S4800U manual Basic Recording Features, 26 EN, Specifying recording length

26 EN BASIC PLAYBACK AND RECORDING (cont.)

Basic

Recording

Features

REWFF

POWER	MENU
	PLAY

S-VIDEO	VIDEO (MONO)L—AUDIO—R
	S-VHS ET	SP	EP	CH
			VCR		REC	STOP/EJECT	PAUSE
					OK

E –1 B

E –2

A Changing display information

Press DISPLAY during recording or recording pause.

Each time you press the button, the front display panel shows the time counter, channel number, tape remaining time and the clock time in in sequence.

Time Counter	Tape Remaining Time
Clock Time		Channel No.

c To display the VCR status including the time counter and the clock time on the TV screen, see “Showing on- screen display” (Z pg. 27).

c "COUNT" appears on the screen when the time counter is shown. "REMAIN" appears on the screen when the tape remaining time is shown.

c The approximate tape remaining time appears and the "" indicator lights on the front display panel.

c The tape remaining time is calculated based on the tape speed (SP or EP) being used. The indicated remaining time is only an estimate.

To reset the time counter, press C. RESET on the

Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.

C –1

4

7

C. RESET

1

2 3

5 6

89

A

2

4

B Specifying recording length

— Instant Timer Recording (ITR)

You can easily specify the recording length from 30 minutes to 6 hours and the VCR shuts off after recording is finished.

During recording, press REC ( ƒ) on the front panel repeatedly until the recording length you want appears on the front display panel.

The (record) indicator starts flashing.

Each time you press the button, recording length increases in 30-minute intervals (up to 6 hours).

E –2

D

Accidentalerasureprevention

To prevent accidental recording on a recorded cassette, remove its record safety tab.

To record on it later, cover the hole with adhesive tape.

Record safety tab

To cancel an ITR, press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0) on the front panel.

C Watching one program while recording another

1 Engage TV mode

During recording...

cIf you connect the TV and the VCR only using the RF connection (Z pg. 7) to view pictures from the VCR

Press TV/VCR on the Remote so that VCR mode indicator goes off from the front display panel.

(The TV broadcast being recorded disappears.)

cIf you are using the AV connection (Z pg. 7) to view pictures from the VCR, change the TV’s input mode from AV to TV.

2 Select channel for viewing

Select the channel, you want to watch, on the TV.

HR-S4800U/S3800U-EN21-29 26 00.1.31, 9:57 AM