JVC HR-S4800U VCR Plus+ Timer Programing, 30 EN, Access VCR Plus+ screen, Enter PlusCode number

30 EN TIMER RECORDING

VCR Plus+®

Timer

Programing

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 8 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method (Z pg. 34) as far as a year in advance.

The VCR Plus+ timer programing system eliminates the need to input channel, date, start and stop time data when programing timer recording settings. Simply key in the PlusCode number for the TV broadcast you wish to record and the VCR’s timer will be automatically programed. (The PlusCode programing numbers are the numbers next to the program in most TV listing.)

DAILY

CANCEL

STOP +/–

2 7

1 2

4	5
7	8

0

1

POWER

3

2

6 3 4

9 WEEKLY

8

4

6

1	Load a cassette
	Make sure the record safety tab is intact. If not,
	cover the hole with adhesive tape, then load it
	into the VCR.
	c The VCR turns on, and the counter is reset,
	automatically.

2	Access VCR Plus+ screen
	Press PROG. on the		VCR PLUS+
	Remote.
	c The clock must be set
	to access the VCR
	Plus+ screen.	PRESS NUMBER KEY (0–9)
		PRESS (+/–) TO SET
	If you have not set the
			EXPRESS PROGRAMMING
	clock, the Main Menu	PRESS (PROG.) TO END
	screen appears after an error message is
	displayed. Refer to page 8 for the Plug & Play
	setting or page 10 for the clock setting
	procedure.
3
	Enter PlusCode number
	Press the appropriate
	keys to input

E –2

3 4 7

Number		VCR PLUS+
the PlusCode number
		123
printed in the TV
listings for the TV
broadcast you wish to
	PRESS NUMBER KEY (0–9)
record, then press OK.			THEN (OK)
	PRESS (PROG.) TO END

Then;

If the Guide Channel Set screen appears

— go to step 4.

If the VCR Plus+ Program screen appears

— go to step 5.

c To make corrections, press CANCEL and input the correct PlusCode number.

HR-S4800U/S3800U-EN30-37 30 00.1.31, 10:26 AM