JVC LPT0428-001A EN15, Activate Index Search, Override Automatic Tracking, Activate Repeat

Variable-Speed Search

ACTIVATE VARIABLE-SPEED SEARCH

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration on page 14).

OR

During playback, press PUSH JOG % or %.

●The more times you press, the faster the playback picture moves.

●To decrease speed, press the button for the opposite direction.

To resume normal playback, press PLAY.

Index Search

Your recorder automatically marks

index codes at the beginning of£ 2 each recording. This function gives

you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

1 Press PUSH JOG fi or % (™ or £) on the remote control. "™1" or "£1" is displayed on screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press PUSH JOG

fi or % repeatedly until the correct index number is
displayed.
Ex.: To locate the beginning of B from the current
position, press		PUSH JOG fi twice.
To locate the beginning of D from the current
position, press PUSH JOG % once.
	Current position
	A	B		C	D E	F
	–2		–1	1	2	3
			%		%

Index number

●When the specified index code is located, playback begins automatically.

EN15

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR +/– buttons.

OVERRIDE AUTOMATIC

TRACKING

1 Press (SP/LP/EP) on the remote to engage manual tracking.

ADJUST TRACKING

MANUALLY

2 Press PR +/– to adjust tracking.

RETURN TO AUTOMATIC

TRACKING

3 Press (SP/LP/EP) on the remote to re-engage automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Repeat Playback

Your video recorder can automatically play back the whole tape 100 times repeatedly.

1	START PLAYBACK
	Press PLAY.
	ACTIVATE REPEAT
2	PLAYBACK
	Press PLAY and hold for over 5 seconds, then release.
	● The Play indicator ( ) on the display panel blinks
	slowly.
	● The tape plays 100 times automatically, and then
	stops.
3	STOP PLAYBACK
	Press STOP at any time to stop playback.

NOTE:

Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.