JVC HR-S5700AM 16EN, Skip Over Unwanted, Sections, Activate Instant Review, Next Function Memory

16EN

PLAYBACK (cont.)

Next Function Memory

The Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, ensure that the recorder is in the Stop mode.

a– For Automatic Start Of Playback After Tape Rewind...

...press REW, then press PLAY within 2 seconds.

b– For Automatic Power Off After Tape Rewind...

...press REW, then press within 2 seconds.

c– For Automatic Timer Standby After Tape Rewind...

...press REW, then press ‰within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer functions if the cassette's record safety tab is removed.

Tape Position Indicator

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

The tape position indicator
appears on screen when, from
the Stop mode, you press FF,
REW or perform an Index
Search. The position of "5" in
relation to "0" (beginning) or "+"		0	+
(end) shows you where you are
on the tape.
"O.S.D." ( pg. 10) must be
set to "ON", or the indicator
	Beginning
will not appear.

3

+ +

1:23:45 REMAIN 1:00

End

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it's found, playback begins automatically.

NOTE:

Depending on the type of tape used, there may be times when the indication is not correct.

●The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, "REVIEW" and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer mode.

Soundtrack Selection

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO on the remote control changes the soundtrack being played back as follows:

TRACK					USE
Recorder's Front Panel	On-Screen Display
			HI FI		For Hi-Fi stereo tapes
	L			R
	L		HI FI		For main audio of Bilingual tapes
			HI FI		For sub audio of Bilingual tapes
				R
NORM		NORM			For audio-dubbed tapes
NORM			HI FI		For audio-dubbed tapes
		NORM

NOTES:

●" " should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the NORM track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 19.

●"O.S.D." must be set to "ON" or the on-screen displays will not appear ( pg. 10).