TR Oubleshooting, New one. pg | JVC HR-S5700AM, LPT0428-001A

52EN

TROUBLESHOOTING (cont.)

	OTHER PROBLEMS

		SYMPTOM		POSSIBLE CAUSE		CORRECTIVE ACTION
	1.	Whistling or howling is heard from		● The camcorder's microphone is too		Position the camcorder so its
		the TV during camcorder record-		close to the TV.		microphone is away from the TV.
		ing.		● The TV's volume is too high.		Turn the TV's volume down.

	2.	When scanning channels, some of		● Those channels have been desig-		If you need the skipped channels,
		them are skipped over.		nated to be skipped.		restore them. ( pg. 47)

	3.	The channel cannot be changed.		● Recording is in progress.		Press PAUSE to pause the recording,
						change channels, then press PLAY to
						resume recording.

	4.	Channel settings that were made		● After the manual settings were		Perform manual setting again.
		manually seem to have changed or		made, Auto Channel Set was
		disappeared.		performed.

	5.	No channels are stored in the		● The TV aerial cable was not		Connect the TV aerial cable to the
		recorder's memory.		connected to the recorder when		recorder properly and turn off the
				Auto Set Up was performed.		recorder power once, then turn the
						recorder power back on again. The
						recorder will try Auto Set Up again.
						( pg. 8)

	6.	"– –:– –" is displayed on the front		● The lithium battery is exhausted.		Replace the lithium battery with a
		display panel after a power outage.				new one. ( pg. 7)

Image 52

JVC HR-S5700AM, LPT0428-001A specifications TR Oubleshooting, New one. pg

Contents

HR-S5700AM Safety Precautions Moisture Condensation Check Contents Basic ConnectionsSituate Recorder Mains Video Connection Connect Recorder to TVConnect Recorder to Mains Back of Recorder Access Video Channel SET Mode Video Channel SetEN Initial Sett Ings With RF Connection SET Video Channel Finish Video Channel SETFinish Video Channel SET Auto Set Up Select LanguageSET Time SET Date During Auto Set Up Select TV SystemStart Auto Channel SET Major Countries TV System Access Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Turn on the Recorder Access Initial SET Screen Select Language Access Clock SET Screen Clock SetStart Clock Operation Press Push JOG %ﬁ to set the year Basic Playback Load a CassettePoint Start Playback Playback Features Activate HIGH-SPEED SearchHigh-Speed Search Slow Motion Adjust Tracking Manually Activate Index SearchOverride Automatic Tracking Return to Automatic Tracking Sections Skip Over UnwantedActivate Instant Review Basic Recording Recording Features Select Channel to WatchSET Counter Display EN Recording SET Recording Duration Engage ITR ModeDisplay Remaining Time Select S-VHS Mode Access Function SET ScreenVHS Super VHS, S-VHS ET and VHS Mode Select S-VHS ET SETSuper VHS ET Access Main Menu Screen S.T. Picture SystemReturn to Normal Screen Preparation Recording PlaybackOr press Record on the recorder During B.E.S.T System Setup Access G-CODE Showview Setup ScreenEN Timer Recording Number Enter Receiving Channel Position Number Number keys to inputNumber of the recorders Received. Then press OK Timer Programming Access G-CODE Showview ScreenAccess G-CODE Programme Screen Enter G-CODE Number Return to Normal Timer ModeEngage Recorders Express Timer Programming Start Time Screen for about 5 seconds, then normal screen Or OK. Program Completed appears onRepeat steps 1 8 for each additional programme Disengage Timer Mode Cancel or Replace a ProgrammeReturn to Timer Mode Check, Cancel And Replace Programmes Cancel or Change Programme SettingConfirm the Overlap Ping Programmes Access Function SET Timer RecordingAuto Timer Auto SP LP Timer Automatic Sat- ellite Program Recording Before performing the following steps Remote Control Functions Remove Power SupplySET Remote Control Code RE-SUPPLY Power TV Multi-brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TV Multi-brand Remote Control SET Brand CodeOperate Unit TV PR +/-,NUMBER keys Cable Box or Satellite Re- ceiver Multi-brand Code DVD Multi-brand CodeCable BOX Brand Name Code DVD Brand Name Code Connecting Using a Stereo System Make ConnectionsAUX in or Tape Monitor Speaker Audio Cable not provided Speaker Mains outlet Access Main Nenu Screen SET ModePreparation For Editing Editing Control SET Mode If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder Edit From Camcorder SET Recording Decks Input Mode Edit To Or From Another Video RecorderStart Source Player Start Recording Deck SET Input Mode Audio DubbingLocate Start Point Engage Audio Dubbing Start Dubbing END Audio Dubbing Setting Of The Colour System Select Buttons Off-Air Recording Playback equipment Tape-To-Tape EditingDubbed tape Access Main Menu Access Tuner SETSelect Auto CH SET Tuner SET Access Channel List Select TV SystemSelect Position SET Desired Station Access Channel List EN Tuner SETDelete a Channel Swap Channel Positions Fine-Tuning Channels FINE-TUNE If youre using the RF OUT connec- tion TroubleshootingPress Play to turn the indicator off Check the cassette Recording TR Oubleshooting New one. pg Questions and Answers Playback Timer Recording @S-VHS ET Button pg IndexDUB Audio Dubbing Button pg 3AUDIO/VIDEO OUT Connectors pg , 5 Rear View TV PR +/- Button pg CABLE/SAT/DVD Button pgEWEEKLY Button pg UPR +/- Button pg Supplied fresh battery actual Specification SMaximum recording time Memo Memo HR-S5700AM