JVC LPT0428-001A Basic Recording, EN17, Choose A Programme, Set Tape Speed, Start Recording, LAY1

RECORDING

EN17

Basic

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

	COLOUR	SYSTEM			PLAY
	PR+
	PR–					STOP/EJECT
	–		RECORD		SP/LP/EP
PR	+/
		1	2	3		NUMBER
				2
		4	5	6
		7	8	9
			0	4

PR +/–

TV signals being received by the recorder's built-in tuner can be recorded onto a video tape. You can "capture" a TV programme using your video recorder.

S-VHS recording is possible only for PAL recordings made in the SP or LP mode, or NTSC recordings made in the SP mode. S-VHS ET recording is possible only for PAL recordings made in the SP mode, or NTSC recordings made in the SP mode.

1	LOAD A CASSETTE
	Insert a cassette with the record safety tab intact.
	● The counter is reset to 0:00:00 and the recorder
	power comes on automatically.
	● Select the appropriate colour system by pressing the
	COLOUR SYSTEM button ( pg. 44).
	CHOOSE A PROGRAMME
	Press PR +/– or the NUMBER keys to select the channel
2 you wish to record.
	SET TAPE SPEED
	Press SP/LP/EP ( ). Check the SP/LP/EP indicator on
	the recorder display panel to confirm the selected tape
3 speed.
4	START RECORDING
	Press and hold RECORD and PLAY on the remote
	control, or press RECORD on the recorder.
	B.E.S.T. takes place at the beginning of each first
	SP and first LP (or EP) recording after inserting the
	cassette ( pg. 22).
	PAUSE/RESUME
	RECORDING
	Press PAUSE. Press PLAY to resume recording.

LAY1

RECORD

STOP

SP/LP/EP

PAUSE

3

5

STOP RECORDING

Press STOP on the remote control or STOP/EJECT on

the recorder. Then press STOP/EJECT to remove the

6 cassette.

NOTE:

When recording in NTSC, if EP is selected, recording will always be done in the VHS mode even if an S-VHS cassette is used.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Recording Resume

Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.