JVC LPT0428-001A, HR-S5700AM Preparation For Editing, Access Main Nenu Screen, SET Mode

EDITING

EN39

Preparation For Editing

Turn on the TV and select the VIDEO channel (or AV mode).

1 2 3

2

4 5 6

7 8 9

4

0

1

OK

MENU

PUSH JOG

Advantages Of S-VHS Video Recorders

You can edit from VHS to S-VHS, from S-VHS to VHS, or, from S-VHS to S-VHS.

●From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to S-VHS: All signals will be transferred without degradation.

Picture Control

This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO."

	ACCESS MAIN NENU
	SCREEN
1 Press MENU.
	ACCESS FUNCTION SET
2	SCREEN
	Place the pointer next to "FUNCTION SET" by pressing
	PUSH JOG %fi, then press OK or PUSH JOG fi.
	SELECT PICTURE CONTROL
	SET MODE
	Place the pointer next to	FUNCTION SET
	"PICTURE CONTROL" by
3 pressing PUSH JOG %fi,		B. E. S. T.	ON
		PICTURE CONTROL	AUTO
	then press OK or PUSH	AUTO TIMER	OFF
	JOG fi to select the	O. S. D.	ON
	desired mode.	AUTO SP=LP TIMER	OFF
		S-VHS	ON
	AUTO*: Normally select	[5/∞] =
	"AUTO."	[MENU] : EXIT
	It automatically adjusts the picture quality.

*When the B.E.S.T. function is set to "OFF" ( pg. 20), you can only select "NORM" instead of "AUTO."

EDIT: Select when you dub tapes.

SOFT: Select when you want to soften the picture.

SHARP: Select when you want to sharpen the picture.

NOTES:

●When you select "EDIT", "SHARP" or "SOFT", the selected mode will not change until you select again.

●When you select "EDIT" to dub tapes, be sure to select "AUTO" (or "NORM" when the B.E.S.T. function is set to "OFF") after you finish dubbing the tapes.

RETURN TO NORMAL

SCREEN

4 Press MENU.

NOTE:

Select EDIT when you are dubbing tapes. Refer to page 36, 37.