36
EN
SPECIAL FEATURES
(cont.)
V
VCR
CABLE/SAT/DVD
Multi-brand Remote Control
For satellite receiver, cable box and DVD
Your remote control can operate the basic functions of your satellite receiver , cable box or DVD.
Before you start . . .
●Turn on the satellite receiver, cable box or DVD using its remote control.
1 | 2 | 3 |
|
|
|
|
| 2 | NUMBER |
4 | 5 | 6 |
| |
|
| |||
7 | 8 | 9 |
|
|
| 0 |
| 4 |
|
|
|
|
|
LAY1 |
|
REW | FF |
STOP |
|
3 | OK |
TV PR+/– | @#+/– |
|
1
2
SET BRAND CODE
Refer to the chart below. While holding down CABLE/ SAT/DVD on the recorder's remote control, enter one of the brand code corresponding to the make of your unit using the NUMBER keys, then press OK.
Check if the unit's power goes off as it should. If it does, try other operations ( step 2).
●Once you have set the remote control to operate the unit, you don't have to repeat this step until you replace your remote control's batteries.
●Some brands have more than one code. If the unit does not function with one code, try entering another.
OPERATE UNIT
First, press CABLE/SAT/DVD to set the remote control to unit mode, then press the corresponding button:
For satellite receiver and cable box . . .
, TV PR +/–, NUMBER keys.
For DVD. . .
, PLAY, STOP, PAUSE, FF, REW, @#(4¢) keys.
●For some brands of unit, you must press OK after having pressed the NUMBER keys.
ATTENTION
The remote control can operate not only the video recorder but also some of your TV, cable box, satellite receiver and DVD.
●To operate your video recorder, first press the VCR button to set the remote control to the Video mode.
●To operate your TV, first press the TV button to set the remote control to the TV mode.
●To operate your satellite receiver, cable box or DVD, first press the CABLE/SAT/DVD to set the remote control to the satellite receiver, cable box or DVD mode.
IMPORTANT
Although the provided remote control unit is compatible with JVC satelite receiver and DVD, as well as many other models, it may not work with your unit, or in some instances, may have limited function capability.
NOTES:
●It's not possible to set the two units at the same time. You can only set the remote control to operate one of these units at a time.
●You have to subscribe to a satellite or cable service to receive satellite or cable channels.
