JVC LPT0428-001A Confirm the Overlap, Ping Programmes, Select the Programme, To Modify

1		2
4	–	5
	STOP+/
7		8

0

EN31

When programmes overlap each other

If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.

			PR	START		STOP	CH	DATE
3			1		8:00	10:00	3	24.04
		PROGRAMOVERLAPPED	2	10:00		10:45	2	25.04
	2		3	11:30		13:00	1	25.04
6
			4		9:00	10:00	92	DAILY
			5
9			6
			7
			8
	4	PR +/–					[PROG] : EXIT
			5		=
			[ /∞]

START+/–

1

3

DATE+/– SP/LP/EP

OK

PUSH JOG

Example: Programme 1 (you have just made) and Programme 4 overlap each other.

	CONFIRM THE OVERLAP-
1	PING PROGRAMMES
	Overlapping programmes blink on the TV screen.
	SELECT THE PROGRAMME
2	TO MODIFY
	Press PUSH JOG %fi, then press OK or PUSH JOG %.
	● You can only select one of the overlapping
	programmes.
	NOTE:
	If you do not mind this overlap, press PROG to finish the
	timer programme setting. The programme with the lower
	programme number will be recorded and the other one
	will not be recorded correctly. If no changes are made
	for approximately 1 minute, the recorder will return to
	the normal screen.
	CANCEL OR CHANGE
3	PROGRAMME SETTING
	To cancel a programme, press when the Programme
	screen you do not want is shown. “PROGRAM
	COMPLETED” appears on the TV screen for about 5
	seconds, then the normal screen appears.
	To change a programme, press the appropriate button:
	START+/-,STOP +/-,DATE+/-,PR+/- and/or SP/LP/EP
	( ) when the Programme screen on which you want
	to make changes is shown, then press OK. “PROGRAM
	COMPLETED” appears on the TV screen for about 5
	seconds, then the normal screen appears.
	NOTE:
	If the overlap is not yet solved, or another overlap occurs
	with the timer programme setting after making the last
	correction on a programme, the conflicting programmes
	will be shown on the Programme Check screen again.
	Repeat the above steps again until the overlap is solved.