JVC HR-S5700AM, LPT0428-001A specifications Edit From Camcorder, Control SET Mode, Player

40EN

EDITING (cont.)

Edit From

A Camcorder

1 2 3

2

4 5 6

7 8 9

4

NUMBER "0" 0

PR +/–

1

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

●When you select "EDIT" to dub tapes, be sure to select "AUTO" (or "NORM" when the B.E.S.T. function is set to "OFF") after you finish dubbing the tapes ( pg. 15).

IMPORTANT:

●To edit, both the player and the recorder must be of the same colour system. Press your recorder's COLOUR SYSTEM button to select the appropriate colour system.

●PAL, SECAM and NTSC camcorders can be used as a player for editing.

●For more information on multi-system compatibility,  pg. 44.

You can use a camcorder as the source player and your video recorder as the recorder.

1	MAKE CONNECTIONS
	A If the camcorder has no S-VIDEO output connector...
	... connect the camcorder's AUDIO/VIDEO OUT
	connectors to the recorder's front panel AUDIO/
	VIDEO input connectors.
	B If the camcorder has an S-VIDEO output connector...
	... connect the camcorder's S-VIDEO OUT and
	AUDIO OUT connectors to the recorder's front
	panel S-VIDEO(S-2) and AUDIO input connectors.
	The recorder's rear panel S-VIDEO IN and AUDIO
	IN input connectors are also available.
	● When using a monaural camcorder, connect its
	AUDIO OUT connector to the AUDIO L input
	connector on your recorder.
	● When a Master Edit Control-equipped JVC camcorder
	is used, the camcorder is capable of controlling the
	recorder. Refer to the camcorder's instruction manual
	for operating procedure.
2	SET RECORDER'S INPUT MODE
	Press NUMBER key "0" and/or PR +/– to select "F-1"
	for the AUDIO/VIDEO input connectors, or "S-2" for the
	AUDIO/S-VIDEO input connectors, depending on the
	connectors being used.
	SELECT "EDIT" FOR PICTURE
3	CONTROL SET MODE
	Follow the "Picture Control" section on page 15, then
	select "EDIT."
4	START CAMCORDER
	Engage its Play mode.
5	START RECORDER
	Engage its Record mode.

AIf the camcorder has no S-VIDEO output connector...

Recorder

	PR+
	PR–
		To rear panel PAUSE
VIDEO	AUDIO	connector
input
	input
	Audio/Video Cable
	(not provided)
		Mini-Plug Cable
	VIDEO OUT	(not provided)
		(JVC camcorder
Player		only)

Camcorder

AUDIO OUT

EDIT

BIf the camcorder has an S-VIDEO output connector...

Recorder

PR+

PR–

To rear panel PAUSE

connector

AUDIO

S-VIDEOinput (S-2)

input

Audio Cable (not provided)

S-Video Cable (provided)	Mini-Plug Cable
	(not provided)
S-VIDEO OUT	(JVC camcorder
Player	only)

Camcorder

AUDIO OUT

EDIT