JVC HR-VP434U manual Select Mode, Make Corrections, Set Date, Time And D.S.T, Manual, Auto

OK

2

q 5/8

MENU

	1	2	3
NUMBER	4	5	6
	7	8	9
		0

CH

2

6

11

Manual

2	SELECT MODE
	At the Override Auto Clock Set screen, place the
	arrow next to “MANUAL CLOCK SET” by pressing
	CH▲▼ or SHUTTLE PLUS 5°, then press OK.

	SET DATE, TIME AND D.S.T.
	The Manual Clock Set	MANUAL CLOCK SET
	screen is displayed and the
3 first setting that can be set		DATE	1/ 1/96 MON
		TIME	– – : – – AM
	begins flashing.	D.S.T.	ON
	Press the appropriate
	NUMBER keys to set the	PRESS NUMBER KEY(0-9)
	date and time (if only 1
		OR (5,°), THEN (OK)
	digit, press "0" first). Press
		PRESS (MENU) TO END
	CH▲▼ or SHUTTLE PLUS
	5° to set AM/PM and D.S.T. (Daylight Saving Time) to
	“ON” (automatic adjustment based on VCR’s clock) or
	“OFF” (if D.S.T. doesn’t apply to you).
	Press OK after AM/PM and D.S.T. settings. The next
	setting that can be set begins flashing. When you’re
	finished with this set-up procedure, press MENU to start
	the clock.
	NOTE:
	CH5° and SHUTTLE PLUS 5° can be used to perform
	all operations. (In this case, press OK after each setting.)
	MAKE CORRECTIONS
	To change any of the settings, press OK or SHUTTLE
	PLUS ª £ until the item you want to change
4 blinks, then set as in step 3.

OK

MENU

SHUTTLE PLUS

Auto

Auto need only be selected if Semi-Auto or Manual had previously been selected.

2	SELECT MODE
	At the Override Auto Clock Set screen, place the arrow
	next to “AUTO CLOCK SET” by pressing CH5° or
	SHUTTLE PLUS 5°, then press MENU as many times
	as necessary to return to the normal screen.