JVC HR-VP434U Check/Correct Input Data, Engage Timer Mode, TIMERRECORDINGcont, Set Tape Speed

34

TIMERRECORDING(cont.)

OK

2

q 5/8

MENU

	1	2	3
NUMBER	4	5	6
	7	8	9

0 TIMER

CH

2

6

SET TAPE SPEED

5 Press SP/EP.

CHECK/CORRECT INPUT DATA

6 If the data is correct as it is, go to step 7. If not, press OK or SHUTTLE PLUS ª£ until the item you want to change begins to blink. Then press the appropriate NUMBER keys, CH5° or SHUTTLE PLUS 5° to obtain the desired setting.

RETURN TO NORMAL

SCREEN

7 Press MENU as many times as necessary.

●Press just once to access the Auto Timer screen (☞ pg. 38).

ENGAGE TIMER MODE

8 Press TIMER. The VCR turns off automatically.

NOTES:

SP/EP

OK

MENU

SHUTTLE PLUS

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections for 10 minutes.

●When timer-recording cable channels received through a Cable Box, be sure to keep the Cable Box set to ON.