JVC HR-VP434U manual Recording, Engage Tv Mode, Select Channel For Viewing, Reset Counter To Zero

32

PLAYBACKANDRECORDINGFEATURES(cont.)

Recording

2 2

q 5/8 6

Record One Program While Watching Another

1	ENGAGE TV MODE
	During recording...
	● If using the RF connection (☞ pg. 6), press TV/VIDEO.
	The VCR's VIDEO indicator goes out and the TV
	broadcast being recorded disappears.
	● If using the AV connection (☞ pg. 6), change the
	TV's input mode from AV to TV.

SELECT CHANNEL FOR

VIEWING

2 Use the TV’s channel selector to set the channel you want to watch.

OSD

1	2	3
4	5	6
7	8	9
C.RESET	0

Display Elapsed Recording Time

RESET COUNTER TO ZERO

1 Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.

DISPLAY ELAPSED TIME ON SCREEN

2 During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display.

●Make sure "SUPERIMPOSE" is set to "ON" (☞ pg. 28).