33

E Set the tape speed.

Press SP/LP/EP (p).

F Set the PDC mode.

Press PDC (number key “7”) to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen, “PDC” is set to “ON”.

●If “VPS/PDC OFF” is displayed on the TV screen, “PDC” is set

to “OFF”.

 “PDC Recording” on page 35.

●VPS (Video Programme System) recording is not currently available in the U.K. and not possible with this unit.

G Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

●Repeat steps B – G for each additional programme.

H Engage the unit’s timer mode.

Press # (TIMER). The unit turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

NOTES:

●To Change The Stop Time:

—press STOP +/– after pressing OK in step D. You can compensate for anticipated programme schedule delays.

●To Timer-Record Weekly Or Daily Serials:

—after pressing OK in step D, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

●You can programme this unit to timer-record as many as 8 programmes. If you try to programme the unit to record a ninth, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes. ( pg. 36)

●If there is a conflict in the timer schedule and one programme overlaps with another, the programme starting earlier or programme with the lower programme number will be recorded.

Satellite Receiver Users

To timer-record a satellite broadcast using the VIDEO Plus+ system:

ASet “L-2 SELECT” to “A/V”. ( pg. 63)

BPerform steps A – H.

CSet the satellite receiver to the appropriate channel before the selected programme begins.

DLeave the satellite receiver’s power on.