16

INITIAL SETTINGS

Auto Set Up

Auto Channel Set/Auto Clock Set/ Auto Guide Program Number Set

After the 1 button on the unit or remote control is pressed for the first time to power on the unit, the Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.

Before starting, make sure of the following:

●The TV aerial cable should be connected to the unit.

●The unit’s mains power cord should be connected to a mains outlet.

●The TV should be set to its AV mode (with AV connection

pg. 15) or UHF channel 36 (with RF connection

pg. 15).

●Slide the TV/S-VHS/DVDswitch to the right.

A Turn on the unit.

Press 1 on the unit or remote control.

B Perform Auto Set Up.

The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select “Auto” and press OK or e.

On the on-screen display Press rt to move the highlight bar (pointer) to “AUTO SET” and press OK or e.

“Auto” blinks on the front display panel; do NOT press any button on the unit or remote control until the front display panel shows either the display as illustrated in step C or “– –:– –” as illustrated on page 19.

●If you are using the on-screen display, the AUTO SET

screen will appear. As Auto Set Up progresses, the “q” mark on the TV screen moves from left to right.

BeginningEnd

●When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable ( pg. 15) and the TV is

turned on, the unit automatically performs the Preset Download ( pg. 18) even if you select “Auto” or “AUTO SET” for Auto Set Up function.