|
| 71 |
|
| * The default setting is bold in the table below. |
|
| |
8 | You can record in SP mode on VHS cassettes with | |
ON | quality. You can play back a tape recorded using the | |
OFF | function on most of | |
| with SQPB | |
| recorders are not compatible with the | |
| When this function is set to “ON”, the | |
| the front display panel. | |
| NOTES: |
|
| ● You can activate the | |
| VHS cassette. |
|
| ● Before recording, make sure that “B.E.S.T.” is set to “ON”. ( below) | |
| ● You cannot activate the | |
| — while recording is in progress. | |
| — while | |
| in progress. |
|
| ||
| ● The | |
| — with | |
| — with recordings in LP/EP mode. | |
| ● To keep the highest quality recording and playback pictures over a long | |
| period of time, | |
| ● Use of high grade tapes is recommended for | |
| some tapes, picture quality will not improve even if the | |
| is used. Check the recording quality before you start important recordings. | |
| ● While playing back a tape recorded using the | |
| recorders, noise may appear. (If playback picture becomes blurred or | |
| interrupted, use a cleaning cassette.) | |
| ● In the | |
| modes ( pg. 25, 26), noise may appear. If these modes are performed | |
| frequently on a tape recorded using the | |
| damaged and the picture may be deteriorated. | |
|
| |
8 B.E.S.T. | You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) | |
ON | ||
OFF |
|
|
|
| |
8 PICTURE CONTROL | This feature helps you to adjust the playback picture quality | |
AUTO | according to your preference. Normally select “AUTO”. | |
EDIT | AUTO: | Provides the optimised picture benefits of the B.E.S.T. |
SOFT | EDIT: | Picture System. |
| Minimizes picture degradation during editing (recording | |
| SOFT: | and playback). |
| Reduces image coarseness when viewing overplayed | |
|
| tapes containing a lot of noise. |
| NOTES: |
|
| ● When you select “EDIT” or “SOFT”, the selected mode will not change | |
| until you select another mode. | |
| ● When you select “EDIT” to dub tapes, be sure to select “AUTO” after you | |
| finish dubbing the tapes. | |
| ● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically | |
| from “AUTO” to “NORM”. | |
|
|
|