62

EDITING (S-VHS DECK) (cont.)

Output/Input Set

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/S-VHS/DVDswitch to the right.

L-1 Output Setting (L-1 OUTPUT)

Set “L-1 OUTPUT” to the appropriate mode depending on the type of appliance connected to the unit’s L-1 IN/OUT connector.

A Select the S-VHS deck.

On the unit

Press S-VHS/DVDrepeatedly so that the S-VHS indicator lights up.

On the remote control

Press S-VHSso that the S-VHS indicator lights up.

B Access the Main Menu screen.

Press SET UP MENU.

C Access the Output/Input Set screen.

Press rt to move the highlight bar (pointer) to “OUTPUT/INPUT SET”, then press OK or e.

D Select the output mode for the L-1 IN/OUT connector.

Press rt to move the highlight bar (pointer) to “L-1 OUTPUT”. Then, press OK or eto select the appropriate setting.

*The default setting is bold in the table below.

8L-1 OUTPUT

VIDEO: If a connected appliance’s input is compatible only with regular video signals, set to “VIDEO”.

S-VIDEO:If a connected appliance’s input is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high- quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

E Return to the normal screen.

Press SET UP MENU.

NOTE:

It is not possible to set the input mode for the L-1 IN/OUT connector. The input for this connector is only compatible with the composite signal.